ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB: The Classic Live Audio Board => Topic started by: Pete Erskine on August 08, 2014, 12:01:29 PM
-
Has anyone found a way to protect RJ11 and 12 tabs similar to the RJ45 boots?
-
Has anyone found a way to protect RJ11 and 12 tabs similar to the RJ45 boots?
I'm guessing you could kludge a fix similar to the boot on a RJ45 using some heat-shrink tubing shrunk tight on the cable but left loose over the tab. Would help a little...
-
Has anyone found a way to protect RJ11 and 12 tabs similar to the RJ45 boots?
Valentine Research (traffic radar detectors) uses RJ11 or 12 for power and control signals, and they have little no-snag boots on them. Perhaps a call to Mike Valentine is in order.
-
Has anyone found a way to protect RJ11 and 12 tabs similar to the RJ45 boots?
Cables to go has Rj11/12 boots
-
Cables to go has Rj11/12 boots
They responded NO. It seems no one is interested in a product like this,
Valentine research did not return my calls or emails.
-
http://www.connectworld.net/cgi-bin/ccc/MP06HS-GY (http://www.connectworld.net/cgi-bin/ccc/MP06HS-GY)
Maybe this?
Ed Walters
-
Has anyone found a way to protect RJ11 and 12 tabs similar to the RJ45 boots?
http://www.iec.net/mp06hs-gy.html
http://www.icablesstore.com/n1-rj11-boots.html
http://www.connectworld.net/cgi-bin/rrdata/MP06HS-GY
http://www.alibaba.com/showroom/rj11-rubber-boot.html
https://www.google.com/search?hl=en&source=hp&q=RJ11+BOOT&gbv=2&oq=RJ11+BOOT&gs_l=heirloom-hp.3..0l2j0i22i30l4.3126.5267.0.5533.9.9.0.0.0.0.281.1250.2j6j1.9.0....0...1ac.1.34.heirloom-hp..0.9.1250.bNHc6LomDDQ
Jeff Robinson
-
Jeff Robinson
Thanks, these are terrific!