ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => SR Forum Archives => LAB Lounge FUD Forum Archive => Topic started by: Randall "Btm Fdr" Cook on June 07, 2010, 03:55:32 PM

Title: Peavey VSX 48 Issues
Post by: Randall "Btm Fdr" Cook on June 07, 2010, 03:55:32 PM

This past Friday and Saturday, my VSX48 started changing/jumping through presets out of the blue. Right in the middle of the band paying a song... BOTH NIGHTS! I thought it may have gotten too hot, so I put a fan blowing into the back of the rack Saturday and it still happened. I had to stop the show entirely, unplug the unit, wait a few seconds, start it back up, and reload my preset.

I cannot afford to go through that again. Does anyone know what the issue might be?

Thank you!
Randall

Title: Re: Peavey VSX 48 Issues
Post by: Dave Barker on June 07, 2010, 05:22:50 PM

A post on the Peavey site should get you a pretty quick response from Marty. Or a direct call to him.

http://forums.peavey.com/viewforum.php?f=29&sid=6ec0ad0d 4073e9f4392a5588e855fb89

Title: Re: Peavey VSX 48 Issues
Post by: John Ward on June 07, 2010, 10:44:36 PM

Pitch it.

Title: Re: Peavey VSX 48 Issues
Post by: Whit Hutchinson on June 07, 2010, 10:52:11 PM

Randall Cook wrote on Mon, 07 June 2010 20:55

Sticky menu scroll button?

Jesus, that could be catastrophic lol. A little bit of wrong x-over through the right cabs with the wrong gain boost and there goes any profit you have made for a while.