ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => The Basement => Topic started by: Mike Diack on April 19, 2017, 11:09:18 PM

Title: The Right Tool for the Job
Post by: Mike Diack on April 19, 2017, 11:09:18 PM
A perfect match...
Title: Re: The Right Tool for the Job
Post by: Brandon Scopel on April 19, 2017, 11:34:46 PM
Hmmmmm, why are there 2 wires running to it?

Sent from my VS987 using Tapatalk

Title: Re: The Right Tool for the Job
Post by: Scott Holtzman on April 20, 2017, 12:41:39 AM
Hmmmmm, why are there 2 wires running to it?

Sent from my VS987 using Tapatalk


Innie and Outie ?



Title: Re: The Right Tool for the Job
Post by: Jeff Bankston on April 20, 2017, 04:40:53 AM
Well that means the people are going to hear the sound upside down. That setup needs to be on the south pole to be heard properly.
Title: Re: The Right Tool for the Job
Post by: Keith Broughton on April 20, 2017, 06:06:35 AM
Well that means the people are going to hear the sound upside down. That setup needs to be on the south pole to be heard properly.
That's an Auzzie speaker  ;D ;D
Nice drink table as well.
Title: Re: The Right Tool for the Job
Post by: Tim Weaver on April 20, 2017, 09:37:45 AM
Well that means the people are going to hear the sound upside down. That setup needs to be on the south pole to be heard properly.

It's ok. I flipped the banana plug.
Title: Re: The Right Tool for the Job
Post by: Chris Grimshaw on April 20, 2017, 09:59:37 AM
It's ok. I flipped the banana plug.

Hey, pros use SpeakOn. In this case, you'd have to put them in with a hammer.

Chris
Title: Re: The Right Tool for the Job
Post by: John Roberts {JR} on April 20, 2017, 10:41:29 AM
That is scarily logical....

JR
Title: Re: The Right Tool for the Job
Post by: Ray Aberle on April 20, 2017, 01:09:21 PM
Well, if you think of this from the POV of:
- We need to keep the speaker dry
- We don't want to muffle the sound with a plastic bag
- What's available that can meet both of these needs?

It does make sense. I presume they did this for that reason, and the fact that people might use it as shelter is a convenient added bonus. I'm hoping this wasn't simply a cheap umbrella holder! :)

-Ray
Title: Re: The Right Tool for the Job
Post by: Jonathan Johnson on April 21, 2017, 12:28:23 PM
That is scarily logical....

JR

Just goes to show that Peavey has (had?) some great engineers that can turn conventional thinking upside down!  ;)
Title: Re: The Right Tool for the Job
Post by: James Feenstra on April 22, 2017, 03:51:25 PM
Hmmmmm, why are there 2 wires running to it?

Sent from my VS987 using Tapatalk
powered box?

Signal + power maybe?
Title: Re: The Right Tool for the Job
Post by: Tom Bourke on April 23, 2017, 03:13:03 PM
Hmmmmm, why are there 2 wires running to it?

Sent from my VS987 using Tapatalk
The second wire is going to the speaker on the left.
Title: Re: The Right Tool for the Job
Post by: Jonathan Goodall on April 24, 2017, 01:40:32 PM
Looking at it, my guess is that the cable seen on the left and right are the same.
Comes in from the left, the excess is dumped on the right then into the speaker.
Title: Re: The Right Tool for the Job
Post by: Stephen Kirby on April 25, 2017, 09:59:57 PM
Wow!  I feel old.  It's so obvious that this is a passive speaker daisy chained with at least one other box than I didn't notice the cables until 10 people got wrapped around the axle.

The joke is the use of the pole socket.     :o
Title: Re: The Right Tool for the Job
Post by: Jonathan Johnson on April 27, 2017, 01:47:02 AM
A perfect match...

"The BE said he wanted a dry mix"