ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB Lounge => Topic started by: Jean-Pierre Coetzee on January 29, 2014, 07:08:38 AM

Title: Audix ADX-51 XLR wireing
Post by: Jean-Pierre Coetzee on January 29, 2014, 07:08:38 AM
Good day all,

I have an Audix ADX-51 that has had it's XLR connector removed, I would like to reconnect it but I cannot find out which colour corresponds to which pin. The three colours or the cables are blue, green and black.

If anyone is aware of the colours used in this mic and it would be greatly appreciated.

Thanking you
Title: Re: Audix ADX-51 XLR wireing
Post by: Mark McFarlane on January 29, 2014, 09:28:45 AM
From the solder side:   

     3-green
1-blue    2-black

Blue is tied to the shell.
Their are some small caps between blue-green and blue-black.

Title: Re: Audix ADX-51 XLR wireing
Post by: Jean-Pierre Coetzee on January 29, 2014, 01:49:38 PM
From the solder side:   

     3-green
1-blue    2-black

Blue is tied to the shell.
Their are some small caps between blue-green and blue-black.
Thanks man, the caps are still in place just the wires were disconnected, will sort this out when I get in tomorrow.