Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This topic has been moved to Product Reviews.

https://forums.prosoundweb.com/index.php?topic=180959.0

Shouldn't this be in the reviews section?

Besides the Marketplace and the basement, the forums here seem completely dead at this point. Unsure where to post anything outside of this section at this point to be honest. Most people have moved over to Reddit or Facebook groups. The moderators are more than welcome to move this thread if it’s more appropriate of course!

nice piece on Bruce

https://www.mixonline.com/live-sound/bruce-knight-veteran-foh-engineer-passes

Shouldn't this be in the reviews section?

Great review.

Still lovin on my DSR112's, but I can easily see the DZR10's as my next speaker when I do retire my venerable DSR's.

Looks like the venerable EAW SM222 has been resurrected - hopefully with Neo drivers

I had a weird problem several years ago on my expression 1. The shop asked if I somehow got moisture in it because the main card (brains) for it was basically toast. It wouldn’t pass audio and the faders were acting weird.  I went ahead and paid the $1800 or so for a new part and also bought an expression 3 around the same time. Haven’t had any other problems since with either console, knock on wood. I carry both with me to every show as a backup just in case now. I like my Soundcrafts, but I think if one should start having problems at this point it might be easier to replace it rather than repair it. Unfortunately it doesn’t seem like Soundcraft has got much in the works for future models or support for current models.

DJ

Soundcraft is a dead brand.  When Tom Der left for a competing brand, after being the last man standing at Soundcraft, I knew it was over.  I'd be surprised if there's more to Soundcraft than a phone number that forwards to someone at another Harman brand office.

I'm still new to working with power distribution... I've only been working around that kind of power distribution for a couple of months.

All the times that I have seen tails tied into the wall or a generator, we've hooked them to the distro before energizing them, and I am trying to think about what situations would happen where it's necessary to have power on camlocks before tying them in, but I can't think of them.

Anyhow- is it normal to have "live" cam-lock tails?  Or was the genny operator thinking that the breakers to the legs were open or something?

No, absolutely not. This genny op needed to be sent to the seal room, to think about what he'd done... But seriously, it was very poor practice to do what he did. I should have, but wasn't really in a position to, demanded that he de-energize the tails before he left.

Any questions, please ask!

How many pages would be a non-mini review be?

The enclosures will be painted with ral 2008 orange raptor.