ProSoundWeb Community

Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB Lounge => Topic started by: Christopher Johnson on May 28, 2014, 02:17:08 PM

Title: EURORACK UB1202: Channel amount?
Post by: Christopher Johnson on May 28, 2014, 02:17:08 PM
Does anyone know how many channels the EURORACK UB1202 has?  http://www.behringer.com/EN/Products/UB1202.aspx

The description says it has 12 inputs, but I am not sure if that is the same amount of channels it has.

Thank you.
Title: Re: EURORACK UB1202: Channel amount?
Post by: Patrick Tracy on May 28, 2014, 02:24:00 PM
By my count it has zero channels.
Title: Re: EURORACK UB1202: Channel amount?
Post by: Mike Pyle on May 28, 2014, 02:49:18 PM
Looks like it has 4 mono input channels and 4 stereo input channels, so if you count the L&R of the stereo inputs as separate channels the total is 12.
Title: Re: EURORACK UB1202: Channel amount?
Post by: g'bye, Dick Rees on May 28, 2014, 02:54:39 PM
Quote from: Patrick Tracy on May 28, 2014, 02:24:00 PM
By my count it has zero channels.

The real question is can it pull more than one skier at a time...
Title: Re: EURORACK UB1202: Channel amount?
Post by: Tim Weaver on May 28, 2014, 06:29:18 PM
Quote from: dick rees on May 28, 2014, 02:54:39 PM
The real question is can it pull more than one skier at a time...


No, that is the part of the boat that you throw into the mud to prevent the boat from drifting. It has nothing to do with pulling skiers....
Title: Re: EURORACK UB1202: Channel amount?
Post by: David Morison on May 29, 2014, 08:22:16 AM
Quote from: Tim Weaver on May 28, 2014, 06:29:18 PM

No, that is the part of the boat that you throw into the mud to prevent the boat from drifting. It has nothing to do with pulling skiers....

If that thing's big enough to hold your boat, you're gonna need a bigger boat...   ;)
Title: Re: EURORACK UB1202: Channel amount?
Post by: g'bye, Dick Rees on May 29, 2014, 08:28:52 AM
Christopher...

Seriously, what do you need to handle with a mixer?  Do you see your needs changing as you proceed or is your application fairly static?