ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB: The Classic Live Audio Board => Topic started by: Craig Clifton on June 19, 2014, 03:24:24 AM
-
Hi all
Does anyone know where I can find processor settings for Lake Contour with EAW 750 series? Do the generic EAW settings work or are they not suitable for the Lake?
I know the UX8800 would be ideal but it's not an option for where I work.
Does anyone here have custom settings for Lake and EAW750 that they would like to share?
Many thanks in advance
-
Hi all
Does anyone know where I can find processor settings for Lake Contour with EAW 750 series? Do the generic EAW settings work or are they not suitable for the Lake?
I know the UX8800 would be ideal but it's not an option for where I work.
Does anyone here have custom settings for Lake and EAW750 that they would like to share?
Many thanks in advance
Lab Gruppen / Lake has them as a down load along with most manufactures ...
-
Lab Gruppen / Lake has them as a down load along with most manufactures ...
Hi Peter
Thanks for the time doing that.
I have been there and loaded those modules for EAW into the Lake, however they have password locked most of the parameters (X-over, channel delay, PEQ etc.)
I can't even view the x-over in designer mode, which I find a little scary. It is probably fine, but it would be reassuring to see visually what is happening.
Any thoughts?
-
Hi Peter
Thanks for the time doing that.
I have been there and loaded those modules for EAW into the Lake, however they have password locked most of the parameters (X-over, channel delay, PEQ etc.)
I can't even view the x-over in designer mode, which I find a little scary. It is probably fine, but it would be reassuring to see visually what is happening.
Any thoughts?
Basically they are just these settings –
http://eaw.com/docs/2_Legacy_Products/Processor%20Settings/KF750/KF750_PROCS_rev1.pdf
I don’t know if they had to adjust the filters Q’s etc. for the Lake.
For what it’s worth, there is a big difference using the Gunness Focus settings.
There was also an error in the early GF settings that produced a 14 dB peak in the HF for the small box array settings. After that was fixed they sounded great, much much better than with a normal processor.