ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => The Basement => Topic started by: Dennis Wiggins on September 26, 2013, 03:05:46 PM
-
Here's my Pfender.
The amp came from a Peavey (Red Stripe) Rage 158, and cranks out about 8-10 watts into 8 ohms. The cabinet with its original speaker is (I think) a Princeton Reverb II (I did remove a tank).
It sounds pretty darned good.
Anyone else have "scrap" projects that you'd care to share?
-Dennis
-
Might give a little more thought to safety and cover up that exposed line ;)
-
Might give a little more thought to safety and cover up that exposed line ;)
Yes. I have not yest made a rear support for the amp module. That will cover the exposed wiring.
Thanks,
Dennis