ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 ... 10 11 [12]   Go Down

Author Topic: DJ System Pics  (Read 54976 times)

Ray Aberle

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 2765
  • Located in Vancouver, WA (and serves OR-WA-ID-BC)
    • Kelcema Audio
Re: DJ System Pics
« Reply #110 on: August 29, 2016, 10:21:11 pm »

In other words, Stephen, if the speakers were clipping with one per side, and you add a second speaker, CHANGING NOTHING ELSE-- they'll both be clipping at that point, since the input level is the same.

Since after adding the second speaker per side you were no longer clipping, clearly you turned it down at that point. However, the second set of speakers would have added 3dB max to your overall level, which is barely perceptible.


Kelcema Audio
Regional - Serving Pacific Northwest (OR, WA, ID, BC)

Scott Carneval

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 973
    • Cenero Audio Visual
Re: DJ System Pics
« Reply #111 on: August 29, 2016, 11:07:43 pm »

The center of the drivers must be within 1/4 wavelength for constructive addition to occur. The speakers are 21.4" wide, so the highest frequency at which you would experience constructive addition is 158hz. You will gain approximately 6db but only from roughly 80hz (factory crossover) to 158hz. Essentially you're just muddying up the sound, but it WILL be louder. There will also be many peaks and valleys in the frequency response due to comb filtering. So while it will sound louder it will also sound much worse. I guess it depends on what's important to you.

Sent from my iPhone using Tapatalk

Uniz Kazz

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 72
Re: DJ System Pics
« Reply #112 on: September 09, 2016, 02:10:36 am »

1x SH96
3x TH118

Powered by DNA20k

Sent from my iPad using Tapatalk

Sean Hennessey

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 64
Re: DJ System Pics
« Reply #113 on: September 09, 2016, 06:09:35 pm »

a rig we deployed recently for a wedding in upstate new york :)

Ron Ventour

  • Newbie
  • *
  • Offline Offline
  • Posts: 15
Re: DJ System Pics
« Reply #114 on: September 26, 2016, 09:17:17 am »

My Personal Wedding (2 laptops because I did a short set so our families could see me DJ)

Bank of America/ Ritz Carlton Urban Gardens in Charlotte, NC

Same system from my wedding but I was DJing a wedding for someone

DJ Gear
2 - Tech 1200mk2
1 - Rane 62

2 - SRX 835 (4 in middle pic)
2 - SRX 828 (4 in middle pic)
1 - EV ZXA5 for DJ Monitor

2 - Chauvet LED Q-Spot 160
4 - Blizzard RGBAW Puck
4 - Cheap lights I had the promoter purchase that actually worked better than I expected (middle pic only)

How many srx835 can keep up with 4 srx828? can 2 srx835's keep up with 4 srx828 or do you need 3 splayed on top of 4 srx828 stood up vertically?

Nathan Riddle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 590
  • Panhandle, FL
Re: DJ System Pics
« Reply #115 on: September 28, 2016, 05:54:25 pm »

Our setup for local high school homecoming.

3x Danley TH118
2x SRX835p
4x RGBAW+UV LED Zoom moving head
4x 10R B280 Spot + Beam + Wash hybrid
6x Blizzard Q6W
8x RGBW LED 7 x 10w
I'm just a guy trying to do the next right thing.
Pages: 1 ... 10 11 [12]   Go Up

Page created in 0.078 seconds with 19 queries.