Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Ken Maytom]

I bought 2 X 4 par lights bar - only to find out that they don't have any inbuilt programs or sound activated functions

I just want to have these on either side of stage for my pub band - turn them on and we have a very basic light show

They have DMX in and out - i have tried to get another sound activated light to control these but no success

i am an absolute novice and don't want to go down the dmx controller path

Is there something i can plug into these bars

[Scott Holtzman]

I bought 2 X 4 par lights bar - only to find out that they don't have any inbuilt programs or sound activated functions

I just want to have these on either side of stage for my pub band - turn them on and we have a very basic light show

They have DMX in and out - i have tried to get another sound activated light to control these but no success

i am an absolute novice and don't want to go down the dmx controller path

Is there something i can plug into these bars

You first need to update to your real name per the rules when you created your account before anyone can help you.

Sent from my VS996 using Tapatalk

[Jeff Lelko]

Is there something i can plug into these bars

Yes - a DMX controller. 

I don't mean to sound blunt, but if they don't have an auto mode, a sound-active mode, or work with an IR remote, you don't have a choice.  A DMX controller doesn't have to be expensive or complicated, but unless you're holding something back about what you bought there is no way around it.  You'll either have to buy a controller or replace these fixtures with something that works the way you need it to. 

[Ken Maytom]

Yes - a DMX controller. 

I don't mean to sound blunt, but if they don't have an auto mode, a sound-active mode, or work with an IR remote, you don't have a choice.  A DMX controller doesn't have to be expensive or complicated, but unless you're holding something back about what you bought there is no way around it.  You'll either have to buy a controller or replace these fixtures with something that works the way you need it to.

not holding anything back - i was hoping i could use another light - i bought this which was supposed to be dmx master - but i cant get it to control the bars

[Jeff Lelko]

i was hoping i could use another light - i bought this which was supposed to be dmx master - but i cant get it to control the bars

DMX doesn’t work that way.  What does the manual tell you for the LED bars in question?  Unless it says anything other than “This unit must be used with a DMX controller”, you’re out of luck for alternate options.

[Ken Maytom]

DMX doesn’t work that way.  What does the manual tell you for the LED bars in question?  Unless it says anything other than “This unit must be used with a DMX controller”, you’re out of luck for alternate options.

No manual unfortunately

[Lee Douglas]

not holding anything back

Manufacturers?  Model number?  Pretty important stuff.

[Paul G. OBrien]

No manual unfortunately

So you got generic chinese fixtures then. If so no loss about the manuals.. they typically contain next to zero useful information. Bottom line though is you will need a DMX controller of some type for these things.. no way around it. With that in hand you can then figure out how to control these lights.. with some help.

[Ken Maytom]

Manufacturers?  Model number?  Pretty important stuff.

Lumicraft Lumistage 4/146/10

a little research helps - sorry i should have done this first

It appears that it does have a 'sound-to-light' mode - just have to figure out how to set it up correctly

i have found the below spec sheet - but no instructions

http://www.lumicraft.com/?dl_id=11

your help is greatly appreciated

Thanks
Ken

[Lance Hallmark]

Lumicraft Lumistage 4/146/10

a little research helps - sorry i should have done this first

It appears that it does have a 'sound-to-light' mode - just have to figure out how to set it up correctly

i have found the below spec sheet - but no instructions

http://www.lumicraft.com/?dl_id=11

your help is greatly appreciated

Thanks
Ken

There are 10 chase patterns built in and 10 sound mode patterns and 20 scene modes for this fixture. Those can be manually selected via the built in menu on the fixture.  Each light can also be controlled separately for color, brightness, strobe via DMX. If you are OK running one of the built in patterns you can just set it manually. If you want full control to change the patterns. colors, etc.. you will need either a DMX controller (like a Chauvet Obey) or use their recommended Lumicon 43 controller or the optional IR remote (probably the easiest solution).

When a fixture has a master/slave control, the device that is set to master will control additional fixtures of the same model that are set to slave.  It will not control different fixtures properly.

[ProSoundWeb Community]