ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: X32 Rack w/X Edit on PC  (Read 9659 times)

Jean-Pierre Coetzee

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 862
  • Gauteng, South Africa
Re: X32 Rack w/X Edit on PC
« Reply #10 on: July 19, 2018, 03:45:02 AM »
Quote from: Kevin Maxwell on July 19, 2018, 01:40:47 AM
No crossover cable needed.

This, most modern networking gear will automatically detect whether the crossover is needed and perform it itself.
Logged
Audio Technician
Word & Life Church

"If you want "loud", then run a piece of sheet metal through a table saw------

If you want "watts"-then plug in a toaster"
- Ivan Beaver

Jim McKeveny

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1454
Re: X32 Rack w/X Edit on PC
« Reply #11 on: July 19, 2018, 12:51:26 PM »
Success! Thank you all.
Logged

Callan Browne

  • Full Member
  • ***
  • Offline Offline
  • Posts: 202
  • Melbourne, Australia
    • Rubix
Re: X32 Rack w/X Edit on PC
« Reply #12 on: July 19, 2018, 11:32:50 PM »
Quote from: John L Nobile on July 18, 2018, 04:19:21 PM
Those numbers that Kevin mentioned will work. But you should also set the gateway on both units to 192.168.1.1
If anybody comes here in the future, do not set the gateway like this, leave it blank on both devices.
This will be important if you have a wifi connection on your computer as well as the cable to your x32.

Sent from my Pixel using Tapatalk

Logged
Melbourne Cover band: Rubix!

ProSoundWeb Community

Re: X32 Rack w/X Edit on PC
« Reply #12 on: July 19, 2018, 11:32:50 PM »

Pages: 1 [2]  All   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.027 seconds with 19 queries.