ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: PRO2 Scribble Strip db Level Issue  (Read 248 times)

Chris Ballard

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
PRO2 Scribble Strip db Level Issue
« on: July 11, 2018, 09:21:09 pm »

Greetings hive mind!

Recently the engineer working on our theatre's production informed me of an issue that he's noticed with our 6 year old PRO2. Apparently on a few channels, when he changes the level of the fader, the read out on the  LCD Scribble Strip jumps down to infinity and then back to the level that the fader is set to. The output of the channel also changes in the same way. Any ideas what could be causing this?

We are running version 3.2.6

Thanks!!
« Last Edit: July 11, 2018, 09:28:30 pm by Chris Ballard »
Logged

John T. Cotton

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 61
    • Frugal Audio
Re: PRO2 Scribble Strip db Level Issue
« Reply #1 on: July 11, 2018, 09:44:58 pm »

Fader/encoder going bad or dirty.

Greetings hive mind!

Recently the engineer working on our theatre's production informed me of an issue that he's noticed with our 6 year old PRO2. Apparently on a few channels, when he changes the level of the fader, the read out on the  LCD Scribble Strip jumps down to infinity and then back to the level that the fader is set to. The output of the channel also changes in the same way. Any ideas what could be causing this?

We are running version 3.2.6

Thanks!!
Logged
John T. Cotton

www.FrugalAudio.com

Chris Ballard

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
Re: PRO2 Scribble Strip db Level Issue
« Reply #2 on: July 12, 2018, 08:11:11 am »

Fader/encoder going bad or dirty.

Thanks John, I was afraid that was the issue.

Nice to see you on here, by the way!
Logged
Pages: [1]   Go Up
 


Page created in 0.063 seconds with 22 queries.