ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [All]   Go Down

Author Topic: M32 proplems  (Read 4218 times)

Jack Stevens

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
M32 proplems
« on: June 08, 2018, 10:14:30 AM »

Hello, I was wondering if anyone could please help me. I am programming a theatre show off the Midas M32 and I am running the show-off snippets. The snippets are controlling the mutes.

My problem is that the snippets are changing the effect rack and the effect rack levels. Is there a chance to safe them as recall safe or something.

I need my effects rack to stay the same throughout the show

please get back asap

Thank
you

Logged

Art Nadelman

  • Full Member
  • ***
  • Offline Offline
  • Posts: 214
Re: M32 proplems
« Reply #1 on: June 08, 2018, 10:21:48 AM »

You might get a faster response posting it here.

https://forum.musictri.be/forumdisplay.php?8-X32-Troubleshooting
Logged

Jack Stevens

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: M32 proplems
« Reply #2 on: June 08, 2018, 11:26:40 AM »

You might get a faster response posting it here.

https://forum.musictri.be/forumdisplay.php?8-X32-Troubleshooting
How do I post on the forum I have signed in but don't know how to post

Logged

Jack Stevens

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: M32 proplems
« Reply #3 on: June 08, 2018, 11:28:11 AM »

How do I post on the forum I have signed in but don't know how to post
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23736
  • Wichita, Kansas USA
Re: M32 proplems
« Reply #4 on: June 08, 2018, 12:05:32 PM »



I got the same message and simply gave up on Behringers forums.  I suggest you call the CARE facility in Las Vegas.
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Steve Litcher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 621
    • MixMasters Podcast
Re: M32 proplems
« Reply #5 on: June 08, 2018, 12:44:57 PM »

There's also a very active M32/X32 user group on Facebook.

I had the same issue with the Behringer-owned forum. I believe it takes them a few days to approve new accounts, so quick answers aren't usually possible there.

Kevin Maxwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1792
  • USA SW CT 46miles from MidTown Manhattan ATCF
Re: M32 proplems
« Reply #6 on: June 09, 2018, 05:58:25 PM »

Hello, I was wondering if anyone could please help me. I am programming a theatre show off the Midas M32 and I am running the show-off snippets. The snippets are controlling the mutes.

My problem is that the snippets are changing the effect rack and the effect rack levels. Is there a chance to safe them as recall safe or something.

I need my effects rack to stay the same throughout the show

please get back asap

Thank
you

Can you post a picture of what your snippet page or 2 looks like? That will tell a lot more info.
« Last Edit: June 09, 2018, 06:13:07 PM by Kevin Maxwell »
Logged

Kevin Maxwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1792
  • USA SW CT 46miles from MidTown Manhattan ATCF
Re: M32 proplems
« Reply #7 on: June 09, 2018, 06:16:18 PM »

Snippets can be extremely focused so it sounds like you have too many things checked to be stored in each snippet. I am assuming that this show is happening now. When you are done if you continue to do theater shows I would recommend Palladium by https://www.chsounddesign.com/
Logged

Christian Ekren

  • Newbie
  • *
  • Offline Offline
  • Posts: 47
Re: M32 proplems
« Reply #8 on: June 09, 2018, 06:27:57 PM »

I've had great luck using Stagesoft's A2 -

http://stagesoft.com/a2/

Sent from my LG-H931 using Tapatalk

Logged

Kevin Maxwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1792
  • USA SW CT 46miles from MidTown Manhattan ATCF
Re: M32 proplems
« Reply #9 on: June 09, 2018, 06:56:22 PM »

I've had great luck using Stagesoft's A2 -

http://stagesoft.com/a2/

Sent from my LG-H931 using Tapatalk

That looks very interesting. It isn’t very clear but it looks like you are manipulating things with the software connected to the console but then just storing the data on the console in the consoles scene system. Which is limited to 100 scenes, I haven’t done a show with less than 100 scenes in a long time. Does this mean that once a show is all setup (written) that you don’t need the software running? Does this only work on one mixer at a time? I have been using 2 Midas M32s for my shows lately.

I will have to download it and play with it.
Logged

Christian Ekren

  • Newbie
  • *
  • Offline Offline
  • Posts: 47
Re: M32 proplems
« Reply #10 on: June 09, 2018, 07:04:03 PM »

That looks very interesting. It isn’t very clear but it looks like you are manipulating things with the software connected to the console but then just storing the data on the console in the consoles scene system. Which is limited to 100 scenes, I haven’t done a show with less than 100 scenes in a long time. Does this mean that once a show is all setup (written) that you don’t need the software running? Does this only work on one mixer at a time? I have been using 2 Midas M32s for my shows lately.

I will have to download it and play with it.
That's essentially it! It's a great tool to use with the console for DCA assignment and mute programming but still uses the consoles built in scenes. I generally use snippets to narrow the recall scope to just DCA assigns and mutes. Once programmed, the show can run without needing A2 running.

But true, the console is still limited to 100 snippets/scenes, unfortunately.

Sent from my LG-H931 using Tapatalk

Logged

Joe Pieternella

  • Full Member
  • ***
  • Offline Offline
  • Posts: 104
Re: M32 proplems
« Reply #11 on: June 10, 2018, 08:52:38 AM »

In X32 edit when you open show control on the scene tab the second row is called paramater filter. All boxes that are checked there get added to the snippet. There are no options to protect paramaters that are added to the snippet as far as I know.

What you could do however is make a new snippet in slot one where the only data you safe is your effects. You would have to load this after loading every snippet you've already made. When making snippets you have to be carefull and select only the parameters you want the snippet to change, the mixer safes only seem to affect scene loading.
Logged

Robert Lofgren

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 959
Re: M32 proplems
« Reply #12 on: June 11, 2018, 03:07:06 AM »

Hi Jack,

I’m the mod for that forum so please hit me with a PM with some more details and I’ll investigate what may have gone wrong with your account.

Tim, was this recently or a while back? I’d like to help if you let me.


Logged

Dave Scarlett

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 327
Re: M32 proplems
« Reply #13 on: June 11, 2018, 10:25:24 AM »

I don't know of the Behringer forum problem myself:

https://forum.musictri.be/forumdisplay.php?70-X32-General-Discussion

Address your questions to Paul Vannatto and you should get a concise answer
Logged

Robert Lofgren

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 959
Re: M32 proplems
« Reply #14 on: June 11, 2018, 11:12:11 AM »

As always - I’m the invisible guy  :'(

Oh, well... Less work for me then  ;D

Address your questions to Paul Vannatto and you should get a concise answer
Logged

Paul Vannatto

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Re: M32 proplems
« Reply #15 on: June 11, 2018, 11:50:24 AM »

Hi Jack and all,

I answered the snippet question here
https://forum.musictri.be/showthread.php?22351-SF-Rack-problems&highlight=snippets+controlling+mutes

Regarding the login issue, I was encountering some PM posting problems last week as well, which maybe related. Let Robert or I know if you are still having these login/posting issues and we'll look into it.

Paul
Logged

Jack Stevens

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: M32 proplems
« Reply #16 on: June 17, 2018, 05:54:34 PM »

Thank you all for the help the show went well and I fixed the problems
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23736
  • Wichita, Kansas USA
Re: M32 proplems
« Reply #17 on: June 17, 2018, 06:17:13 PM »

Thank you all for the help the show went well and I fixed the problems

Glad you fixed it, Jack.

Now for those playing along in our home audience, why don't you tell us what you did to fix the problems you were having?

Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

ProSoundWeb Community

Re: M32 proplems
« Reply #17 on: June 17, 2018, 06:17:13 PM »


Pages: 1 2 [All]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.032 seconds with 24 queries.