ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Amp suggestions  (Read 465 times)

John Roberts {JR}

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 15949
  • Hickory, Mississippi, USA
    • Resotune
Re: Amp suggestions
« Reply #10 on: June 12, 2018, 12:36:51 pm »

There is a fixed instal sub forum that might be more appropriate to constant voltage equipment questions.

On the internet people tell you everything "they" know, not the answer to "your" question.....

Brian Hancock

  • Newbie
  • *
  • Offline Offline
  • Posts: 11
Re: Amp suggestions
« Reply #11 on: June 18, 2018, 12:10:22 am »

Sorry guys, been a busy past couple of days. 

These are for professional install, not live sound.  Crown CDI1000s have been getting hot and burning out power supplies when they are in an always on install.  (Restaurants, churches with Caroline/bell systems, other businesses).  Some of these amps are using one channel for a 70v Line and one channel for an 8ohm Line.  Different inputs, different outputs. 

Iím just looking for an amp similar to that one, and the Drivecore Line might be the best for it.

Sent from my iPhone using Tapatalk

not to sound condescending but why are they overheating ?? driven to limits? insufficient airflow in the rack? poor line voltage either low or high may cause power supply failures as well ?? how old out of warranty?

basically what's the root cause because these amps have been around a while in face I've put a number in some less than desirable situations and they have run for years un interrupted
Pages: 1 [2]  All   Go Up

Page created in 0.021 seconds with 17 queries.