ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Digico s21 + sd11 gain sharing issues  (Read 2496 times)

peter dakin

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
Digico s21 + sd11 gain sharing issues
« on: June 05, 2018, 05:31:52 PM »

Having issues with sharing a SD rack between a s21 and a sd11.

S21 set as master and internal clock, SD rack clocked to s21, sd11 to be “slave” and I’m trying to set to “receive only”, however only “full control” is selectable in the gain sharing section.

All audio passes fine and sd11 is set to clock via madi..

Just worry’s me that the sd11 isn’t working like normal, like when gain sharing with another SD console.

Should I be worried? This is a touring show, so gains aren’t being changed, no issues with lack of tracking/risk of changes etc.

Thoughts/advice appreciated.
Logged

Christopher Irwin

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 50
  • Los Angles/Orange County, California
Re: Digico s21 + sd11 gain sharing issues
« Reply #1 on: June 06, 2018, 03:14:53 PM »

Having issues with sharing a SD rack between a s21 and a sd11.

S21 set as master and internal clock, SD rack clocked to s21, sd11 to be “slave” and I’m trying to set to “receive only”, however only “full control” is selectable in the gain sharing section.

All audio passes fine and sd11 is set to clock via madi..

Just worry’s me that the sd11 isn’t working like normal, like when gain sharing with another SD console.

Should I be worried? This is a touring show, so gains aren’t being changed, no issues with lack of tracking/risk of changes etc.

Thoughts/advice appreciated.

Have you tried unselecting the "master" button on the SD11?

For faster/more thorough response it might be worth posting this on the Digico Facebook page.  It gets daily questions and responses and is accessible to a few of the official Digico Support guys who often chime in.
Logged

eytan gidron

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 66
Digico s21 + sd11 gain sharing issues
« Reply #2 on: June 06, 2018, 11:18:30 PM »

As Christopher said. Post your question on the DiGiCo Users FB page, there is alot of info there and you will get the correct and accurate snswer.
Logged

peter dakin

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
Re: Digico s21 + sd11 gain sharing issues
« Reply #3 on: October 29, 2018, 08:58:57 PM »

as a follow up.

DiGiCo were a bit stumped, but recommended the new S21 update. After updating, we had no issues with SD series and S series sharing racks and gains, and tracking worked perfectly (via BNC).

All worked flawlessly for months tour.
Logged

Mark Rombouts

  • Full Member
  • ***
  • Offline Offline
  • Posts: 102
Re: Digico s21 + sd11 gain sharing issues
« Reply #4 on: October 30, 2018, 03:41:14 AM »

on the SD11 go to network settings en deselect master. Then you can select receive only in the i/o page
Logged

ProSoundWeb Community

Re: Digico s21 + sd11 gain sharing issues
« Reply #4 on: October 30, 2018, 03:41:14 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.016 seconds with 21 queries.