We purchased two Tio's a few months ago and are starting to have issues with them. We are running two Tio's with an LS9, we have to use the R remote to control them both. When you first turn on the booth the tio's connect to the R remote with no issue. It is only after five minutes that the tio's vanish from the R remote. The only way to get them to reconnect is to restart the booth but then you only get five minutes again. Has anyone ran into this issue before?
Garon, this will be hard to trouble shoot over the web with out a lot more info about your set up, network etc. I suspect its a network issue. I had a similar problem with my TIOs but found out there was a non-gigabit switch inserted in the chain somewhere. Replaced that and no problems since.
Is there a dedicated network for the Dante? There are guys here that are way more qualified to ask network questions than me, maybe someone will jump in.
I am not using an LS9 BTW so my comments may not relate your issue.