ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Implementing Gain Structure Change  (Read 397 times)

Jeff Classen

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Implementing Gain Structure Change
« on: May 18, 2018, 09:38:35 pm »

I have recently taken over managing our sound booth, and the volunteers who run it.

I quickly realized that our gain structure is all wrong. (main and monitor Amps at Max sensitivity, gains moderate, channel faders consistently running at -25db to -20db, master faders also at -20db)

I want to educate our volunteers and implement proper gain structure and maximize our S/N Ratio, mixing around unity on the channel and master faders. I cannot sit in the sound booth to train them as I am the music director and on the stage when this would be necessary.

Any thoughts as to how to implement this type of change?

Logged

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4832
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: Implementing Gain Structure Change
« Reply #1 on: May 18, 2018, 09:53:16 pm »

Please update your display name to be your real name.

This is required by forum rules

Then we can talk about your question.

Sent from my VS995 using Tapatalk

Logged
Scott AKA "Skyking" Holtzman
River Delta Audio is now:

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks
Pages: [1]   Go Up
 


Page created in 0.031 seconds with 16 queries.