ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Any concerns using Senn ENG set as IEM?  (Read 4390 times)

frank kayser

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1658
  • Maryland suburbs of Washington DC
Re: Any concerns using Senn ENG set as IEM?
« Reply #10 on: April 23, 2018, 08:39:16 PM »
Quote from: TomBoisseau on April 15, 2018, 09:44:49 PM
The wiring into the Sennheiser SK 100 G3 beltpack transmitter is quite odd, but, trust me, this is the correct wiring:


Tip & Sleeve - short together and connect to signal "minus" (-) or shield
Ring - connect to signal "plus" (+)


I know, I know.  I told you it was quite odd, but that is the correct way to do it!

Or course this is an "unbalanced" connection, so if you are using a balanced output to feed the SK 100 use an appropriate adapter or transfomer to "unbalance" the signal.


Tom


Thanks again!
Logged

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3703
  • College Station, Texas
    • Daniela Weaver Photography
Re: Any concerns using Senn ENG set as IEM?
« Reply #11 on: April 24, 2018, 12:16:05 AM »
FWIW, Gary P Nunn has been doing this for years. His IEM rig consists of a set of TX/RX beltpacks that get plugged into any aux you have available. With that and a little devil's lettuce he'll play for hours on end.....
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

frank kayser

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1658
  • Maryland suburbs of Washington DC
Re: Any concerns using Senn ENG set as IEM?
« Reply #12 on: April 24, 2018, 09:32:08 AM »
Quote from: Tim Weaver on April 24, 2018, 12:16:05 AM
FWIW, Gary P Nunn has been doing this for years. His IEM rig consists of a set of TX/RX beltpacks that get plugged into any aux you have available. With that and a little devil's lettuce he'll play for hours on end.....


Good to know!  I guess you grow that Devil's Lettuce down there.  Is that like money growing on trees?
Logged

Tim Weaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3703
  • College Station, Texas
    • Daniela Weaver Photography
Re: Any concerns using Senn ENG set as IEM?
« Reply #13 on: April 24, 2018, 04:05:35 PM »
Quote from: frank kayser on April 24, 2018, 09:32:08 AM

Good to know!  I guess you grow that Devil's Lettuce down there.  Is that like money growing on trees?

Not for me it isn't! I think Colorado has a monopoly on it now....
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

ProSoundWeb Community

Re: Any concerns using Senn ENG set as IEM?
« Reply #13 on: April 24, 2018, 04:05:35 PM »

Pages: 1 [2]  All   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.041 seconds with 19 queries.