ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [All]   Go Down

Author Topic: Designs for mic stand storage cart?  (Read 5376 times)

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 270
Designs for mic stand storage cart?
« on: March 23, 2018, 05:58:51 pm »

I'm looking to build a storage cart for a dozen K&M round base mic stands with boom attachments. It will be used to transport between storeroom and stage. Anyone have any pictures or descriptions of one that has worked out well?
Logged
Scott Hofmann

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 893
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: Designs for mic stand storage cart?
« Reply #1 on: March 23, 2018, 07:14:48 pm »

I don't have any quick pictures to attach but I have seen various designs that use PVC pipe stacked together where you slide a mic stand into each piece of pipe.

Corey Scogin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1026
  • Birmingham, AL, US
Re: Designs for mic stand storage cart?
« Reply #2 on: March 24, 2018, 01:10:40 am »

I have one of these from Audiopile.net. It's top heavy and so must be carefully rolled over bumps but it rolls without issue on smooth surfaces.



Edit: A plus is that the vertical orientation means it doesn't take up much space.
If used for a venue, I'd consider building one about 2/3 of this height so that the stands stick out of the top for better visibility if you have different models of stands.
« Last Edit: March 24, 2018, 01:14:42 am by Corey Scogin »
Logged

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 270
Re: Designs for mic stand storage cart?
« Reply #3 on: March 24, 2018, 09:21:39 am »

I have one of these from Audiopile.net. It's top heavy and so must be carefully rolled over bumps but it rolls without issue on smooth surfaces.



Edit: A plus is that the vertical orientation means it doesn't take up much space.
If used for a venue, I'd consider building one about 2/3 of this height so that the stands stick out of the top for better visibility if you have different models of stands.
Not sure how the PVC pipe designs would work with round base mic stands since it would be a real hassle to take the bases off the uprights each time and sort of defeat the purpose of quick deployment.
Logged
Scott Hofmann

Bradford "BJ" James

  • Full Member
  • ***
  • Offline Offline
  • Posts: 224
Re: Designs for mic stand storage cart?
« Reply #4 on: March 24, 2018, 12:25:58 pm »

I'd think a design where they are stored horizontally would be space effective. Some bases at the stern, some at the bow, possibly offset a little to be able to squeeze more bases together. Some plywood frames made to hold up the stick/boom, and made onto a rolling cart.
Logged
Proud Canadian dealer for Danley Sound Labs, Yamaha, QSC, Yorkville Sound and more.

Jay Barracato

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1879
  • Solomons, MD
Re: Designs for mic stand storage cart?
« Reply #5 on: March 24, 2018, 10:23:53 pm »

Not sure how the PVC pipe designs would work with round base mic stands since it would be a real hassle to take the bases off the uprights each time and sort of defeat the purpose of quick deployment.
Maybe worth investigating quick disconnects for the bases.

Sent from my Moto Z (2) using Tapatalk

Logged
Jay Barracato

Mark Cadwallader

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1086
  • Helena, Montana USA
Re: Designs for mic stand storage cart?
« Reply #6 on: March 25, 2018, 01:06:38 am »

Quite a while ago an act came through with a large road case. It had scalloped inserts that allowed the stands to lay horizontally along the long axis of the case. IIRC, there was enough clearance at the end of the case for three round bases (attached) at each end. I do not remember if it had a top scalloped insert so a second layer could rest on top of the base layer.  The scalloped part was sort of like the things that LightSource makes to stack truss.  Maybe something like that, if you have room. The other thing to consider is a A-frame like they use to stack pipes.

Hope this helps.
Logged
"Good tools are expensive, but cheap tools are damned expensive."

Corey Scogin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1026
  • Birmingham, AL, US
Re: Designs for mic stand storage cart?
« Reply #7 on: March 25, 2018, 07:54:18 pm »

Not sure how the PVC pipe designs would work with round base mic stands...

Ha! Oops.
You caught me skimming the post. My brain read what it wanted to read.
Logged

Rick Earl

  • Full Member
  • ***
  • Offline Offline
  • Posts: 248
Re: Designs for mic stand storage cart?
« Reply #8 on: March 26, 2018, 02:08:56 pm »

Logged

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1340
Re: Designs for mic stand storage cart?
« Reply #9 on: March 26, 2018, 04:58:47 pm »

I'm looking to build a storage cart for a dozen K&M round base mic stands with boom attachments. It will be used to transport between storeroom and stage. Anyone have any pictures or descriptions of one that has worked out well?
Scott,

My 38+ year old truck integer (45" x45" x15") design below was for Atlas MS-12 round base stands, using K&M or Atlas booms, 14 fit in the case and the clips can all remain on the booms. The drawing on the yellow pad was done by my brother Roy in the mid 1980's when we tired of remeasuring the first one each time we built another..

K&M round base stands dimensions may be different, but the concept would work fine adjusted to any base and stand dimensions.

The case can be made 22.5" deep and fit 28 stands.
A slide in cover fits in front of the case.

The 15" deep case can have stability issues if the rear casters turn towards the loading side, best to load it against a wall.

The design has saved thousands of man-hours in labor, and countless stripped threads in dozens of systems and venues.

Cheers,
Art
« Last Edit: March 27, 2018, 04:04:26 am by Art Welter »
Logged

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 270
Logged
Scott Hofmann

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 270
Re: Designs for mic stand storage cart?
« Reply #11 on: March 26, 2018, 05:27:54 pm »

Quite a while ago an act came through with a large road case. It had scalloped inserts that allowed the stands to lay horizontally along the long axis of the case. IIRC, there was enough clearance at the end of the case for three round bases (attached) at each end. I do not remember if it had a top scalloped insert so a second layer could rest on top of the base layer.  The scalloped part was sort of like the things that LightSource makes to stack truss.  Maybe something like that, if you have room. The other thing to consider is a A-frame like they use to stack pipes.

Hope this helps.
Thanks for the suggestions!
Logged
Scott Hofmann

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 270
Re: Designs for mic stand storage cart?
« Reply #12 on: March 26, 2018, 05:32:47 pm »

Scott,

My 38+ year old truck integer (45" x45" x15") design below was for Atlas MS-10 round base stands, using K&M or Atlas booms, 14 fit in the case and the clips can all remain on the booms. The drawing on the yellow pad was done by my brother Roy in the mid 1980's when we tired of remeasuring the first one each time we built another..

K&M round base stands dimensions may be different, but the concept would work fine adjusted to any base and stand dimensions.

The case can be made 22.5" deep and fit 28 stands.
A slide in cover fits in front of the case.

The 15" deep case can have stability issues if the rear casters turn towards the loading side, best to load it against a wall.

The design has saved thousands of man-hours in labor, and countless stripped threads in dozens of systems and venues.

Cheers,
Art

I think you have the winner Art! Just what I was looking for.
I believe I will make mine a little deeper so I can add hinged doors and have room for additional stands. The added depth will keep it from tipping over too.
Logged
Scott Hofmann

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1340
Re: Designs for mic stand storage cart?
« Reply #13 on: March 27, 2018, 04:31:58 am »

I think you have the winner Art! Just what I was looking for.
I believe I will make mine a little deeper so I can add hinged doors and have room for additional stands. The added depth will keep it from tipping over too.

Scott,

Doubling the amount of stands with only 7.5" more depth is worth it.
The 15" and 22.5" depths have room for 3/4" doors using 10" round bases.

You can also fit around at least an additional 4 folding tripods at a diagonal in the small size, 8 in the larger- 36 stands with clips and booms.
That pack would weigh in over 500 pounds fully loaded- I remember when that didn't seem all that heavy...

Art


Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 18879
  • Wichita, Kansas USA
Re: Designs for mic stand storage cart?
« Reply #14 on: March 27, 2018, 04:50:38 pm »


Scott,

Doubling the amount of stands with only 7.5" more depth is worth it.
The 15" and 22.5" depths have room for 3/4" doors using 10" round bases.

You can also fit around at least an additional 4 folding tripods at a diagonal in the small size, 8 in the larger- 36 stands with clips and booms.
That pack would weigh in over 500 pounds fully loaded- I remember when that didn't seem all that heavy...

Art

Oh yeah. Old Dayz: "It's on wheels, no problem..."  These days: "hey, I need 2 stagehands over here".

My first "real" PA system used 3 section K&M tripod stands and I could put a dozen of them and 9 2 section booms into a 26" duffle bag.  Carry it?  Naw, it rode in on top of a subwoofer.  I owned 3 round base stands for singers that had to do their Freddy Mercury impersonations...  Those K&M stands are still around in various other peoples rigs today.

I've seen variations of the Art & Roy design but your original seems better than the tributes.  :)
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

Bill McIntosh

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 366
  • Louisville KY
Re: Designs for mic stand storage cart?
« Reply #15 on: March 27, 2018, 08:21:58 pm »

Scott,

My 38+ year old truck integer (45" x45" x15") design below was for Atlas MS-12 round base stands, using K&M or Atlas booms, 14 fit in the case and the clips can all remain on the booms. The drawing on the yellow pad was done by my brother Roy in the mid 1980's when we tired of remeasuring the first one each time we built another..

K&M round base stands dimensions may be different, but the concept would work fine adjusted to any base and stand dimensions.

The case can be made 22.5" deep and fit 28 stands.
A slide in cover fits in front of the case.

The 15" deep case can have stability issues if the rear casters turn towards the loading side, best to load it against a wall.

The design has saved thousands of man-hours in labor, and countless stripped threads in dozens of systems and venues.

Cheers,
Art

Keeping a copy of this, thanks Art.  14 stands -- is that 8 upside down, and 6 horizontal?

The mic stand grove in our church tech storage room is out of control.  We would need 2 of these, I think.
Logged
Opinions are like belly buttons.  Everybody has one, but not all are suitable for public display.

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1340
Re: Designs for mic stand storage cart?
« Reply #16 on: March 27, 2018, 08:22:12 pm »

I've seen variations of the Art & Roy design but your original seems better than the tributes.  :)
They may have been copies of the prototypes  :'(.

I "borrowed" from some other designs before the "original" ;^)



Logged

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1340
Re: Designs for mic stand storage cart?
« Reply #17 on: March 27, 2018, 08:30:50 pm »

Keeping a copy of this, thanks Art.  14 stands -- is that 8 upside down, and 6 horizontal?

The mic stand grove in our church tech storage room is out of control.  We would need 2 of these, I think.
The 14 stand case is loaded 4 right side up on the bottom, 3 on the left, 4 upside down on the top, three on the right.
The 28 stand case gets a second round after any folding tripod stands get put in at a diagonal.

Unload in reverse (especially in church, where swearing is usually frowned upon)...
Logged
Pages: 1 2 [All]   Go Up
 


Page created in 0.043 seconds with 18 queries.