Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Andrew Broughton]

Surprisingly poor labeling for a company that makes fantastic products.



Sent from my iPhone using Tapatalk Pro

[Dave Bednarski]

...almost looks like a knock off.

[Andrew Broughton]

I’m referring to the way of labeling the ground lift switch.


Sent from my iPhone using Tapatalk Pro

[Richard Turner]

looks right compared to company website images

[Andrew Broughton]

Sigh...


Sent from my iPhone using Tapatalk Pro

[Jay Barracato]

Sigh...


Sent from my iPhone using Tapatalk Pro

Looks to me like it might cause confusion between is the triangle a directional symbol that means the up position lifts the ground or is the triangle a ground symbol that means the down position lifts the ground.

Sent from my Moto Z (2) using Tapatalk

[Keith Broughton]

I read it as ground lift on output 2, up to lift.
However, it could have been made a little clearer if "out 2" was beside the switch and "ground" was at the lower end and "lift" was at the upper.

[Jim McKeveny]

Agreed. Poor graphics. Disambiguation needed.

Also: The only control needed on the front/top panel is the stomp switch. Place Mic 2 Pin 1 Lift elsewhere. Like near Mic 2 connector. (See "Disambiguation").

[Erik Jerde]

Pretty obvious to me but ymmv.  You’d only hit the lift to fix a problem anyways.  You hit it and it either makes things better, worse, or no change.  Doesn’t really matter what it had been when you flipped it.

[Andrew Broughton]

The unnecessary arrow is pointing to the the connector, but it’s easy to think that it is indicating the direction to push the switch to enable the “lift”.


Sent from my iPhone using Tapatalk Pro

[ProSoundWeb Community]