ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Feeding a 70 volt line with two amplifiers  (Read 858 times)

Larry Stelter

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Feeding a 70 volt line with two amplifiers
« on: February 23, 2018, 07:07:17 am »

Here is the picture. Over a 1000í run with 20 plus 70v speakers with different wattages tapped. This has been operating for years. Unknowingly, the line got hooked up with an amp on each end which fed power simultaneously. Now some of the speakers donít work. Can anyone explain what technically happened to the voltage in the line?
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6176
  • Audio Plumber
Posting Rules
« Reply #1 on: February 23, 2018, 11:17:52 am »

Here is the picture.

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
Logged
Pages: [1]   Go Up
 


Page created in 0.034 seconds with 22 queries.