ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Anyone using a Roland M-400 Mixer?  (Read 411 times)

Paul Peterson

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Anyone using a Roland M-400 Mixer?
« on: February 12, 2018, 10:19:06 pm »

We have a 10 year old M-400 used for weekly worship services.  We recently had it lock up, screen blank and audio output stop during a church service.  Weeks later I found that if I was in  a channel display screen for an Aux output channel and pushed the F7 button ' COPY MAIN MIX' It would do the same thing.  It recovers pretty gracefully by cycling the power switch.

Roland just says ' never heard of that problem.  Send it in for service'

If you have an M-400 would you mind trying your F7 while in a Aux Out channel display and let me know if you get the same results?

Thanks - Paul
« Last Edit: February 14, 2018, 07:24:26 am by Paul Peterson »
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6029
  • Audio Plumber
Posting Rules
« Reply #1 on: February 12, 2018, 10:23:28 pm »

We have a 10 year old M-400

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
Logged
Pages: [1]   Go Up
 


Page created in 0.033 seconds with 19 queries.