ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Control Network on Primary and Secondary Dante Switches  (Read 15302 times)

Benjamin Krumholz

  • Full Member
  • ***
  • Offline Offline
  • Posts: 156
Re: Control Network on Primary and Secondary Dante Switches
« Reply #20 on: February 03, 2018, 03:43:16 PM »


Maybe we need to sit in the shop for a day and plug a bunch of stuff together and try to break it until we figure it out.  :)

Come By any time Brian... We are always "Trying to break it.."

So the problem is not on the computer side.. You can always get a secondary, Third, NIC for a computer to access both.  Primary and Secondary Vlan1 or Vlan2

A device like an amplifier or mic receiver typically would only have one network interface.. In the PSM1000 with dual network ports, it is as you say.. A mini Switch...
Logged

brian maddox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3267
  • HeyYahWon! ttsss! ttsss!
Re: Control Network on Primary and Secondary Dante Switches
« Reply #21 on: February 03, 2018, 04:08:43 PM »

Come By any time Brian... We are always "Trying to break it.."

So the problem is not on the computer side.. You can always get a secondary, Third, NIC for a computer to access both.  Primary and Secondary Vlan1 or Vlan2

A device like an amplifier or mic receiver typically would only have one network interface.. In the PSM1000 with dual network ports, it is as you say.. A mini Switch...

I"m going to take you up on the invite as soon as i can.  'cause i'm genuinely curious as to the solution to this problem.  Plus i like breaking stuff....  :)

Meanwhile, if you solve this i'll come by just so you can show me the solution.
Logged
"It feels wrong to be in the audience.  And it's too peopley!" - Steve Smith

brian maddox
[email protected]
Savannah, GA

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'

ProSoundWeb Community

Re: Control Network on Primary and Secondary Dante Switches
« Reply #21 on: February 03, 2018, 04:08:43 PM »


Pages: 1 2 [3]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.037 seconds with 22 queries.