ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Anybody UNHAPPY with their dLive?  (Read 6336 times)

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1467
Re: Anybody UNHAPPY with their dLive?
« Reply #20 on: May 26, 2018, 03:40:48 AM »

Pardon me for butting in, but...   

When you adjust the "gain" on ULXD from a Yamaha desk, you are actually adjusting the transmitter* gain just as if you were doing it from the ULXD receiver front panel.

*yes, the transmitter "gain" is adjusted from the receiver - some sort of slight of hand with decoding the digital transmission and only assigning a "gain" setting at that point.


The "Gain" shown in the picture (QLXD) changes - whats shown on this screen is also shown on the dLive's display.  I don't know exactly what its adjusting ... but it would not surprise me if its adjusting the TX gain :-)

https://www.facebook.com/protechm/videos/1938765042821510/
« Last Edit: May 26, 2018, 10:05:20 AM by Peter Morris »
Logged

Richsoper

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: Anybody UNHAPPY with their dLive?
« Reply #21 on: May 26, 2018, 11:44:39 AM »

If you bring in via Dante then yes providing your Dante devices and dLive are in the same IP range you can use the integration without running a seperate data line


Sent from my iPhone using Tapatalk
Logged

ProSoundWeb Community

Re: Anybody UNHAPPY with their dLive?
« Reply #21 on: May 26, 2018, 11:44:39 AM »


Pages: 1 2 [3]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.017 seconds with 25 queries.