Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Debbie Dunkley]

I just set up the room for rehearsal and noticed something for the first time. When I hit the talkback mic and then release it - on release there is an audible click. Console is QU16.  Its not a huge problem of course but weird...it has either always been there and I never noticed or has suddenly started to occur. I hope it's the former.

[Mike Caldwell]

Did the phantom power get turned on to the talk back mic. It's in the set up menu under the audio tab.
Don't know if that would even cause it or not, never had it turned on
in my QU-Pac.

[Debbie Dunkley]

Did the phantom power get turned on to the talk back mic. It's in the set up menu under the audio tab.
Don't know if that would even cause it or not, never had it turned on
in my QU-Pac.

Just double checked and phantom is not on. The click occurs on the mixes I have the talkback mic routed to. It is a metallic click sound - very obvious.

[Debbie Dunkley]

I just also tried my QU PAC under the same conditions and no audible click.

[Mike Caldwell]

Does it do it without a mic plugged and the gain turned down?

[ProSoundWeb Community]