ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Wireless microphone setup for smaart  (Read 17533 times)

Chris Delcambre

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 55
Wireless microphone setup for smaart
« on: November 21, 2017, 11:32:27 PM »

What's everybody using for wireless setups for smaart? Shure, senn, lectrosonics?

Thanks
Chris
Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9533
  • Atlanta GA
Re: Wireless microphone setup for smaart
« Reply #1 on: November 22, 2017, 08:45:59 AM »

What's everybody using for wireless setups for smaart? Shure, senn, lectrosonics?

Thanks
Chris
The SINGLE most important thing is a NON COMPANDING system.

Most wireless mics have companding-so search carefully.  It will screw up the results of a measurement system due to the compression and expansion of the signal.

We us a lectrosonics system that was first eveloped for wireless interface (as far as I know-maybe it was another reason)
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

Christian Ekren

  • Newbie
  • *
  • Offline Offline
  • Posts: 47
Re: Wireless microphone setup for smaart
« Reply #2 on: November 22, 2017, 09:37:58 AM »

Lectrosonics TM400 would probably be your best bet. Purpose built for measurement and calibration.
Logged

Nathan Riddle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2045
  • Niceville, FL
    • Nailed Productions
Logged
I'm just a guy trying to do the next right thing.

This business is for people with too much energy for desk jobs and too much brain for labor jobs. - Scott Helmke

Dave Garoutte

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3379
  • San Rafael, CA
Re: Wireless microphone setup for smaart
« Reply #4 on: November 22, 2017, 05:55:34 PM »

The SINGLE most important thing is a NON COMPANDING system.

Most wireless mics have companding-so search carefully.  It will screw up the results of a measurement system due to the compression and expansion of the signal.

We us a lectrosonics system that was first eveloped for wireless interface (as far as I know-maybe it was another reason)
Is the problem the companding or the resultant delay?
Logged
Nothing can be made idiot-proof; only idiot resistant.

Events.  Stage, PA, Lighting and Backline rentals.
Chauvet dealer.  Home of the Angler.
Inventor.  And now, Streaming Video!

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1467
Re: Wireless microphone setup for smaart
« Reply #5 on: November 22, 2017, 06:32:32 PM »

Is the problem the companding or the resultant delay?

The problem is companding (TX compression - RX expansion)  - that's the advantage of the Line 6, its signal chain is basically straight into a 24bit A/D with no companding.  Delays in the measurement system are easily accounted for.
Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9533
  • Atlanta GA
Re: Wireless microphone setup for smaart
« Reply #6 on: November 22, 2017, 07:35:49 PM »

  Delays in the measurement system are easily accounted for.

Agreed.

And if the same mic is used, any delay is simply not an issue.  Whatever is "common" doesn't matter.  It is the DIFFERENCE in the measurement that matters.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

Lyle Williams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1558
Re: Wireless microphone setup for smaart
« Reply #7 on: December 09, 2017, 07:25:34 AM »

I thought the line 6 model 35 had an inbuilt high-pass filter.
Logged

Don Boomer

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 340
    • RF Venue
Re: Wireless microphone setup for smaart
« Reply #8 on: December 10, 2017, 06:38:34 PM »

The problem is companding (TX compression - RX expansion)  - that's the advantage of the Line 6, its signal chain is basically straight into a 24bit A/D with no companding.  Delays in the measurement system are easily accounted for.

Digital systems that use data compression will also be problematic. Some do, some don’t.
Logged
Don Boomer
Senior applications engineer
RF Venue, Inc.

Langston Holland

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 82
Re: Wireless microphone setup for smaart
« Reply #9 on: December 17, 2017, 06:33:53 PM »

Don is exactly right. Digital wireless is no guarantee of the absence of artifacts that can make the system unusable for measurement applications. I’ve found that wireless systems of any type that are capable of fairly high channel counts generally cannot be used as a mic cable replacement for acoustic measurement. The Lectrosonics Hybrid system is a rare exception.

I recently tried a MIPRO ACT-818 receiver with TA-80 plug-on transmitter. It is a digital system that is advertised "to eliminate compander noise" and to be suitable for "acoustical measurements". I beg to differ. :)

Measurements

I set the TA-80 transmitter to its 24dB gain setting (reasonable for many measurement mics) and found the 1kHz clipping/limiting threshold and made log swept sine and Maximum Length Sequence (MLS) measurements 1dB below that threshold. Then I repeated those measurements 20dB below that threshold. I included MLS measurements because that process is extremely sensitive to non-linearities and time variance (LTI violations). Swept sines are the most forgiving of the non-LTI behavior present in almost all real acoustic systems to some extent. MLS freaks out if LTI is violated even slightly and makes a great blood hound when you’re looking for imperfections. Green and pink traces are MLS.



I made the same tests on the Line 6 XD-V75 receiver with TBP12 beltpack transmitter. The cable for the beltpack: XLF pin 2 to TA4F pins 3-4. XLF pins 1-3 to TA4F pin 1. TA4F pin 2 unconnected. The big downside is no phantom power like the MIPRO plug-on has. Green and blue traces are MLS.

Logged
God bless you and your precious family - Langston

ProSoundWeb Community

Re: Wireless microphone setup for smaart
« Reply #9 on: December 17, 2017, 06:33:53 PM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.042 seconds with 24 queries.