ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: SpeakOn 2-pole or 4-pole for Daisy Chain  (Read 212 times)

Simon Day

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
SpeakOn 2-pole or 4-pole for Daisy Chain
« on: November 20, 2017, 04:35:36 am »

Hello everyone. New here so please excuse me if this isn't the correct thread.

Setting up a Live System with the following equipment;

Wharfedale Pro CPD 1000 Power Amp
PEAVEY PV23XO Active Crossover
2 x Wharfedale Titan 12 Passive
1 x Wharfedale Pro Impact 18B Sub

Question is,

1. From the Power Amp, can I run both the Titan 12 Passives from CH1 in a daisy chain, then then the sub from CH2.
2. All connections are SpeakOn, do I need 2 core cable, or 4 core cable to the connectors if I'm daisy chaining the Titan 12s.

Thank you for any advice in advance.

SimonD

Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5725
  • Audio Plumber
Re: SpeakOn 2-pole or 4-pole for Daisy Chain
« Reply #1 on: November 20, 2017, 09:43:29 am »

Hello everyone. New here so please excuse me if this isn't the correct thread

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
Logged
Pages: [1]   Go Up
 


Page created in 0.041 seconds with 18 queries.