Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Simon Day]

Hello everyone. New here so please excuse me if this isn't the correct thread.

Setting up a Live System with the following equipment;

Wharfedale Pro CPD 1000 Power Amp
PEAVEY PV23XO Active Crossover
2 x Wharfedale Titan 12 Passive
1 x Wharfedale Pro Impact 18B Sub

Question is,

1. From the Power Amp, can I run both the Titan 12 Passives from CH1 in a daisy chain, then then the sub from CH2.
2. All connections are SpeakOn, do I need 2 core cable, or 4 core cable to the connectors if I'm daisy chaining the Titan 12s.

Thank you for any advice in advance.

SimonD

[Mac Kerr]

Hello everyone. New here so please excuse me if this isn't the correct thread

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac

[ProSoundWeb Community]