ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: How much power do i need to drive these power hungry Powerlight Amplifiers???  (Read 2893 times)

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1460
    • Sturz Audio

Thanks,

Am sure the generator would handle water heater kind of loads close to its capacity but the peak draw from powerlights is definitely way way higher than the rms draw.
Conrad
Didn't you say you had PLX amps?

The powerlight series of amps from QSC is a quality notch above the PLX and doesn't typically suffer from these issues.


Sent from my iPhone using Tapatalk Pro
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Conrad Muzoora

  • Full Member
  • ***
  • Offline Offline
  • Posts: 244
  • Mbarara, Uganda. www.koolevents.co.ug
    • Kool Events Uganda

Didn't you say you had PLX amps?

The powerlight series of amps from QSC is a quality notch above the PLX and doesn't typically suffer from these issues.


Sent from my iPhone using Tapatalk Pro

Thanks for the observation,
I kind of use powerlight to mean qsc's switching amps. In this case was a mixture of plx and CX series, in my opinion identical amps with a few different feature sets but same amp modules. I tried a powerlight PL236 once and couldn't tell any difference between it and the plx 3602.
Conrad
Logged
Pages: 1 [2]  All   Go Up
 


Page created in 0.076 seconds with 21 queries.