ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: XD-V35L for Smaart?  (Read 5106 times)

Lyle Williams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1558
XD-V35L for Smaart?
« on: October 22, 2017, 05:25:58 PM »

Hi,

Is anyone using the Line-6 XD-V35L for Smaart? 

Just using the omni lav or with a measurement mic?

Just want to check that the V35 works before I buy.

Thanks,
Logged

Alfredo Prada

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 56
Re: XD-V35L for Smaart?
« Reply #1 on: October 23, 2017, 12:01:38 AM »

Hi,

Is anyone using the Line-6 XD-V35L for Smaart? 

Just using the omni lav or with a measurement mic?

Just want to check that the V35 works before I buy.

Thanks,

I am using the XD V75 and it works fine, using NTI's miniSPL mic (battery power, no need for 48v) into the lav pack with Shure's XLR to TA4 cable. The XD V35L should work also.
Logged

Lyle Williams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1558
Re: XD-V35L for Smaart?
« Reply #2 on: October 23, 2017, 06:07:04 AM »

Thanks!
Logged

Lyle Williams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1558
Re: XD-V35L for Smaart?
« Reply #3 on: October 26, 2017, 05:33:24 AM »

It looks like the 35 bodypack rolls of low frequencies.  The 55/75 bodypacks can be set to be flat.
Logged

ProSoundWeb Community

Re: XD-V35L for Smaart?
« Reply #3 on: October 26, 2017, 05:33:24 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.039 seconds with 20 queries.