ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 3 [All]   Go Down

Author Topic: PK Sound Gravity 30 Subwoofer  (Read 2625 times)

MIKE Lynn

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
    • Lynn Sound Systems
PK Sound Gravity 30 Subwoofer
« on: September 22, 2017, 04:12:12 pm »

  So anyone have any thoughts on this beast ? Im always checking out Subs and came upon this one. I haven't heard of the Company but that dont mean anything.

http://www.pksound.ca/products/gravity-30/

 I Also know DAS http://www.dasaudio.com/en/p/sf-30a-2/ uses the same powersoft 30 in a box they built for club install , and Rat sound http://ratsound.com/daveswordpress/2017/01/08/american-bus/  makes a box with it also.
« Last Edit: September 22, 2017, 04:15:14 pm by MIKE Lynn »
Logged
Lynn Sound Systems INC.
Crown-I-tech , JBL-VRX/VTX , Soundcraft, Shure

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 18006
  • Wichita, Kansas USA
Re: PK Sound Gravity 30 Subwoofer
« Reply #1 on: September 22, 2017, 04:16:05 pm »

  So anyone have any thoughts on this beast ? Im always checking out Subs and came upon this one. I haven't heard of the Company but that dont mean anything.

http://www.pksound.ca/products/gravity-30/

 I Also know DAS http://www.dasaudio.com/en/p/sf-30a-2/ uses the same powersoft 30 in a box they built for club install , and Rat sound http://ratsound.com/daveswordpress/2017/01/08/american-bus/  makes a box with it also.

PK is one of the darlings of the EDM circuit.
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

MIKE Lynn

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
    • Lynn Sound Systems
Re: PK Sound Gravity 30 Subwoofer
« Reply #2 on: September 22, 2017, 04:20:22 pm »

PK is one of the darlings of the EDM circuit.

 Yeah I read that about them , How do the compare to most other commonly use subs in the industry ? Are there alot of riders calling for them in the EDM world ? Most of the EDM show systems I have seen use a ton of dual 18 boxes (matching the tops Brand Name )  in cardiod configuration.
Logged
Lynn Sound Systems INC.
Crown-I-tech , JBL-VRX/VTX , Soundcraft, Shure

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1187
Re: PK Sound Gravity 30 Subwoofer
« Reply #3 on: September 22, 2017, 05:02:23 pm »


1)How do the compare to most other commonly use subs in the industry ?
2)Are there alot of riders calling for them in the EDM world ?
3)Most of the EDM show systems I have seen use a ton of dual 18 boxes (matching the tops Brand Name )  in cardiod configuration.
Mike,

1) The M-Force driver is so radically different than any moving coil driver it has been hard to really compare, as it has a moving magnet and built-in amplification. The fact that Dave Rat decided to use them is a good indicator that they are a step above the best moving coil drivers in terms of output to space.
The PK design integrating the center grill as the motor heat sink would be a big advantage in the EDM world, where LF dynamic range is often no more than that of a sine wave, 3dB crest factor. PK had also been using some of the best pro 18" drivers, so they also seem to think the expense is warranted in terms of output to truck space.
2) No idea if the "newish" tech has gained much traction, riders typically request "X amount of 2x18" rather than output levels, though there can be as much as 15 dB level difference between 18" output..
3) Tried and true, but for big budgets the M-Force will probably start gaining traction, but just like with tapped horns, it is hard to convince anyone that one cabinet can do what 2 or 3 can until they hear it.

Art

Logged

radulescu_paul_mircea

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 75
Re: PK Sound Gravity 30 Subwoofer
« Reply #4 on: September 22, 2017, 06:55:42 pm »

other companies are also using this new platform from Powersoft. Aura Audio, Funktion One (this one I heard twice and both times they managed to really impress me), Mag Audio, Audio Focus (40" design, 2 vs 6 dual 18 comparison .
https://m.facebook.com/groups/162278330843687?view=permalink&id=253343785070474
The tech is new, not very well understood and it really does perform extremely well. Because of the way the whole system works , with a pressure sensor  and 10 micro seconds lateny feedback, the sound is extremely tight and with very low distortions . The reactivity of the motor is letting the system to be a low loss oscillator that can be very efficient, the damping of the amp gives control over the motion of the diaphragm, the low impedance is dominating the enclosure's parameters and with the amp unit's you can virtually change the Thiel Small parameters of the drive to make it behave as you want it to.
That's why it still in development, being so much different and having so many thing to modify to get the best performance.


Sent from my TA-1053 using Tapatalk
« Last Edit: September 22, 2017, 06:58:11 pm by radulescu_paul_mircea »
Logged

Helge Dr. Bentsen

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 424
  • Oslo, Norway.
Re: PK Sound Gravity 30 Subwoofer
« Reply #5 on: September 23, 2017, 05:07:54 am »

M-force is really nice, but you can still do EDM with dual 18", you just need to bring a serious one to your gig.

https://www.facebook.com/bernie.broderick/videos/10154803326492539/
https://www.facebook.com/bernie.broderick/videos/10154805721012539/
Logged

radulescu_paul_mircea

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 75
Re: PK Sound Gravity 30 Subwoofer
« Reply #6 on: September 23, 2017, 05:56:02 am »

M-force is really nice, but you can still do EDM with dual 18", you just need to bring a serious one to your gig.

https://www.facebook.com/bernie.broderick/videos/10154803326492539/
https://www.facebook.com/bernie.broderick/videos/10154805721012539/
Yes, of course you can. Having 80 18" TLW3000 and 104 B&C 15"SW115 drivers rubbed by 184 *1700 watt Powersoft amp modules really helps in an EDM concert . ANYA and Otto are really incredible.the OTTO is not about shear force. It's an extremely good and reliable tool to help fill the deep end of the Anya's ,which are very powerful down low by themselves.
This was last week, used in a market with 60K people and at 20-80 meters it sounded like a studio monitor flat to 25 Hz everywhere.

Sent from my TA-1053 using Tapatalk

Logged

MikeHarris

  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
Re: PK Sound Gravity 30 Subwoofer
« Reply #7 on: November 19, 2017, 03:48:37 am »

The driver looks like a update of Mr Danley's Servodrive concept.
Curious to hear what he thinks of the driver.
Tom...Ivan ??
Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8307
  • Atlanta GA
Re: PK Sound Gravity 30 Subwoofer
« Reply #8 on: November 19, 2017, 02:02:58 pm »

The driver looks like a update of Mr Danley's Servodrive concept.
Curious to hear what he thinks of the driver.
Tom...Ivan ??
About the only thing is has in common with the servodrive is that the driver is round and it produces sound.  It pretty much stops there.

The driver in question is basically a "backwards" loudspeaker.  Instead of a moving coil, it has a moving magnet.

The servo drive was a motor (used in data transport machines) that rotated and went through a rotary to linear mechanism that drove the cones.  The cones were basically common cones (no magnet or voice coil) that were dipped in epoxy to make them stronger and had a half round surround for long excursion.

These drivers were then mounted in a horn to get extra output.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1187
Re: PK Sound Gravity 30 Subwoofer
« Reply #9 on: November 19, 2017, 04:10:33 pm »

These drivers were then mounted in a horn to get extra output.
The SDL Contra Bass used the dual 15" with dual 18" passive radiators.
Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8307
  • Atlanta GA
Re: PK Sound Gravity 30 Subwoofer
« Reply #10 on: November 19, 2017, 05:10:35 pm »

The SDL Contra Bass used the dual 15" with dual 18" passive radiators.
Yeah, that one was the exception.

All of the others were horn loaded.

I believe the contrabass was developed to "talk to elephants" so it had to fit in the back of a jeep.

It later found favor for home listening.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

MikeHarris

  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
Re: PK Sound Gravity 30 Subwoofer
« Reply #11 on: November 19, 2017, 11:41:14 pm »

About the only thing is has in common with the servodrive is that the driver is round and it produces sound.  It pretty much stops there.

Both share a non-conventional method of driving the round thing that produces sound.

Every few years my client Byron Lee (RIP) would have me order belts for his SDL subs. Anything wear out on the PSoft ?
Logged

Chris Grimshaw

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 452
    • Grimshaw Audio
Re: PK Sound Gravity 30 Subwoofer
« Reply #12 on: November 20, 2017, 06:32:07 am »

Anything wear out on the PSoft ?

Shouldn't do. It operates on a similar principle to a normal speaker, except it's the magnet that's being moved. That means you can bolt the voicecoil to a big ol' heatsink and drop 10KW into it.
Not really worth doing for smaller cones (moving coils propel those just fine) up to, say, 21". Past that, moving magnet seems to be the way to do it.

Chris
Logged
Sheffield-based sound engineering.
www.grimshawaudio.com

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8307
  • Atlanta GA
Re: PK Sound Gravity 30 Subwoofer
« Reply #13 on: November 20, 2017, 07:28:54 am »

Both share a non-conventional method of driving the round thing that produces sound.

Every few years my client Byron Lee (RIP) would have me order belts for his SDL subs. Anything wear out on the PSoft ?
So if we are going to go that route, I guess you could add piezo tweeters and "maybe" old (and some new) field coil speakers to the list, if "different" is the thing that makes them "common".
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

MikeHarris

  • Full Member
  • ***
  • Offline Offline
  • Posts: 126
Re: PK Sound Gravity 30 Subwoofer
« Reply #14 on: November 20, 2017, 03:13:16 pm »

Both share a non-conventional method of driving the round thing that produces sound.

Sorry to ruffle your feathers Ivan but I am clearly referring to alternate methods of driving the piston used for subs.
Maybe Tom could comment intelligently
Logged

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2632
  • Toronto
Re: PK Sound Gravity 30 Subwoofer
« Reply #15 on: November 20, 2017, 03:29:29 pm »

The SDL Contra Bass used the dual 15" with dual 18" passive radiators.
I heard one of these "back in the day" and was VERY impressed!
As for the Gravity30, I saw published specs of response and output but, once again, no frequency defined relationship  ::)
Logged
I don't care enough to be apathetic

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8307
  • Atlanta GA
Re: PK Sound Gravity 30 Subwoofer
« Reply #16 on: November 20, 2017, 05:09:24 pm »

Sorry to ruffle your feathers Ivan but I am clearly referring to alternate methods of driving the piston used for subs.
Maybe Tom could comment intelligently
OK, they both use a piston.

But how that piston is driven has nothing in common-other than an audio signal.

And just to be clear- you did NOT say anything about subs.  You said a round thing that produces sound.  I gave examples of that.

I'm sorry if I insulted you, but I was just answering the "question" as it was presented.

Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

radulescu_paul_mircea

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 75
Re: PK Sound Gravity 30 Subwoofer
« Reply #17 on: November 21, 2017, 10:28:00 am »

The patent for the M-FORCE https://www.google.com/patents/WO2011125083A1?cl=en
And here is the technology behind it that had allowed it to perform as it does
http://www.powersoft-audio.com/en/docman/993-us-patent-improvements-to-systems-for-acoustic-diffusion/file

Sent from my TA-1053 using Tapatalk

Logged

Kevin McDonough

  • Full Member
  • ***
  • Offline Offline
  • Posts: 247
Re: PK Sound Gravity 30 Subwoofer
« Reply #18 on: November 24, 2017, 02:25:10 pm »

hey

well, to maybe meet somewhere in the middle I'd say it's a little similar to servodrive in that as you say Ivan, they're both piston like system to move the cone.

Very different i execution though, as (again as Ivan says) servodrive were a belt motor type system, where as this would be a bit closer o a solenoid.

On a traditional speaker it is a moving voice coil inside a fixed magnet. The voice coil had to be pretty thin and lightweight to make sure the cone can move at the required speed, which of course limits how much current can be put into it before it goes pop.

On the other hand, M-force as said flips this around and its the traditional magnet that is the moving part, and the voice coil the fixed part wrapping around it.

This means it can be as big and bulky as needed, with nice big heat sinks, and LOTS more current can be thrown at it.  This then makes cone weight less of an issue as it has the current, and hence motor force, to move much heavier weights. So I'm sure there is a 24", 30" and even 40" cone available that are made from a lightweight plastic rather than paper, so they're super rigid and can push a LOT of air at very high pressure.

K
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 18006
  • Wichita, Kansas USA
Re: PK Sound Gravity 30 Subwoofer
« Reply #19 on: November 24, 2017, 04:43:18 pm »

hey

well, to maybe meet somewhere in the middle I'd say it's a little similar to servodrive in that as you say Ivan, they're both piston like system to move the cone.

Very different i execution though, as (again as Ivan says) servodrive were a belt motor type system, where as this would be a bit closer o a solenoid.

On a traditional speaker it is a moving voice coil inside a fixed magnet. The voice coil had to be pretty thin and lightweight to make sure the cone can move at the required speed, which of course limits how much current can be put into it before it goes pop.

On the other hand, M-force as said flips this around and its the traditional magnet that is the moving part, and the voice coil the fixed part wrapping around it.

This means it can be as big and bulky as needed, with nice big heat sinks, and LOTS more current can be thrown at it.  This then makes cone weight less of an issue as it has the current, and hence motor force, to move much heavier weights. So I'm sure there is a 24", 30" and even 40" cone available that are made from a lightweight plastic rather than paper, so they're super rigid and can push a LOT of air at very high pressure.

K

The fundamental difference is the use of a rotary servo motor and the belt linear motion transformer.

Pistonic transducers, in and of themselves, are not unique.
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8307
  • Atlanta GA
Re: PK Sound Gravity 30 Subwoofer
« Reply #20 on: November 24, 2017, 06:24:12 pm »

The fundamental difference is the use of a rotary servo motor and the belt linear motion transformer.

Pistonic transducers, in and of themselves, are not unique.
I made a "similar" speaker back in the 70s.  It was a moving magnet driver.

I took the coal dump mechanism (solenoid) from my train set, attached a construction paper cone to it with a cloth surround on a coat hanger frame.

I drove it from a Korean war era amplifier.

It made sound, but not very loud.  So I guess I was far ahead in my thinking  ;D ;D ;D.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

radulescu_paul_mircea

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 75
Re: PK Sound Gravity 30 Subwoofer
« Reply #21 on: November 24, 2017, 09:12:24 pm »

It seems simple if one is looking at the driver and amplifier as independent units. The real thing is in fact the use of both as a complete system. Yes, the driver is a moving magnet fixed coil transducer with certain particularities, like the magnetic centering which allows it to work very with a centering suspension with the most important job of keeping the diaphragm from rocking and not to dictate the spring behavior.
The most important thing this system and the IPal system have is the possibility to change the parameters from a system with too much motor force in a virtual way and to modify the real behavior to a mathematical model without adding resistive losses and keeping the overall efficiency intact . So it's not just a motor. The evolution is not there in fact , because one could get the same results from normal driver if active cooling is used in some way. The evolution is in making this driver so efficient that it would not normally work in a reasonable enclosure and to be able to alter it as you want without loosing the efficiency advantage.

Sent from my TA-1053 using Tapatalk

Logged
Pages: 1 2 3 [All]   Go Up
 


Page created in 0.039 seconds with 17 queries.