ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Behringer SD16 stage Box issue?  (Read 540 times)

John Chiara

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1062
Behringer SD16 stage Box issue?
« on: September 12, 2017, 07:10:51 pm »

I have 2 of these running to a full size X32. Last night ch 1-16 Box stopped passing signals from all channels. The console saw the box, but the box had both AES50A and B lit up. Ch 17-32 Box only had the A light lit and worked fine.  If I unplugged the master Cat5 cable it 'snapped' back to normal operation. Happened twice during the night. Ideas?
Logged

Jerome Malsack

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1150
Re: Behringer SD16 stage Box issue?
« Reply #1 on: September 13, 2017, 10:23:52 am »

Where is the power connected.  I have my S16 power coming from the same UPS as the X32.  That way I have maintained my star and power stability.  If you have your devices on stage stringers or building outlets, you might have ground loop issues, or power problems.  Also is the AES50 Ethernet cable shielded and ethercon connectors. 
Logged

Brian Jojade

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1235
    • HappyMac Digital Electronics
Re: Behringer SD16 stage Box issue?
« Reply #2 on: September 14, 2017, 12:35:40 am »

What kind of cable are you using?

Are you daisy chaining the boxes, or are you running a line back to the console from each?
Logged
Brian Jojade

John Chiara

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1062
Re: Behringer SD16 stage Box issue?
« Reply #3 on: September 14, 2017, 10:29:41 am »

What kind of cable are you using?

Are you daisy chaining the boxes, or are you running a line back to the console from each?

Daisy chained. Cable is an install Cat5. Not sure what it is.
Logged

Jean-Pierre Coetzee

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 562
  • Gauteng, South Africa
Re: Behringer SD16 stage Box issue?
« Reply #4 on: September 14, 2017, 12:02:57 pm »

Daisy chained. Cable is an install Cat5. Not sure what it is.
This, make sure you are using a shielded Cat cable then look at power issues.

Sent from my SM-G900H using Tapatalk

Logged
Audio Technician
Word & Life Church

"If you want "loud", then run a piece of sheet metal through a table saw------

If you want "watts"-then plug in a toaster"
- Ivan Beaver
Pages: [1]   Go Up
 


Page created in 0.105 seconds with 22 queries.