ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Using wireless for installed remote speakers.  (Read 824 times)


  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Using wireless for installed remote speakers.
« on: September 08, 2017, 08:54:06 pm »

Is there any professional wireless audio equipment that broadcasts a digital security key of some kind to mute the audio signal when the key is not present? 

For new outdoor speakers installation on a 3000 sq-foot patio, the church is asking if I can use wireless audio to eliminate speaker wires and ugly surface conduit.  This seems a little risky to me using standard Sennheiser G3 or similar wireless equipment because anyone can be in the area and broadcasting on same ISM band audio channel.  I need a way of blocking the "always powered" receiver from passing anything but the desired transmitter's signal.  The patio system's transmitter will be "mostly off", so I canít simply overpower the channel.

Please offer opinions and suggestions.  Thanks.

Henry Cohen

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 751
  • Westchester Co., NY, USA
Re: Using wireless for installed remote speakers.
« Reply #1 on: September 08, 2017, 09:01:49 pm »

Please offer opinions and suggestions

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.
Henry Cohen

CP Communications
Radio Active Designs
Pages: [1]   Go Up

Page created in 0.027 seconds with 17 queries.