Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Console Connectivity Solutions
Danley "Podware" vs "System Engineer"
Ryan C. Davis:
Hey guys,
Wasn't sure where to post this so feel free to move it if necessary.
I've been using Danleys "system engineer" software to make adjustments on my Danley 20k4 amp. It works reasonably well but the manual makes no mention of "System Engineer" -- only an application called "podware". Anyone know if they're the same thing? I've done some searching and all the "podware" downloads seem to come from pretty generic sources (even though some are podiatry websites haha). One of the snippets I found mentioned " Obcom compliant devices. Maybe "Podware" is just a generic term for an open protocol? I suppose it's neither here nor there, I just want to know if I'm using the correct program to control the amplifier.
RD
Justin Perrachon:
Podware is the old control software. System engineer has been more reliable and faster in my experience
Ryan C. Davis:
--- Quote from: Justin Perrachon on August 05, 2017, 06:41:08 PM ---Podware is the old control software. System engineer has been more reliable and faster in my experience
--- End quote ---
Ok cool, just wanted to make sure I was using the correct program. Sounds like I am.
Thanks!
Mark Wilkinson:
--- Quote from: Ryan C. Davis on August 05, 2017, 11:01:57 PM ---Ok cool, just wanted to make sure I was using the correct program. Sounds like I am.
Thanks!
--- End quote ---
I've been working with the Danley folks trying to get System Engineer to work with my Win10 computers, so it's pretty certain System Engineer is the correct program. I had your same question, but Podware has never been mentioned by them in the back and forth troubleshooting emails.
Which btw, anybody else have any trouble connecting using Win10? Win7 is working fine....
Thx
Ryan C. Davis:
I'm on a win 7 machine. Actually a virtual win 7 machine running on a mac and no issues so far. If I had a win 10 machine I'd gladly give it a whirl for you but I don't.
It's not a surface tablet running win 10 is it? I've tried installing some other config software we use on a windows 10 tablet with no luck and it works fine on the laptops.
Navigation
[0] Message Index
[#] Next page
Go to full version