ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: PA2 + Onboard DSP?  (Read 2903 times)

Jack Hoff

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
PA2 + Onboard DSP?
« on: June 23, 2017, 12:51:06 AM »

Since its obvious that Im not going to get an answer to my question I am just going to update this.

Since the original issue has been resolved I am going to update this to say this:

The registration page currently says  "YOU HAVE THE ABILITY, AS YOU REGISTER, TO CHOOSE YOUR OWN USERNAME." 

And you can get from the registration page and post into the Pro AV forum without actually coming into the Pro AV forum where you can see the sticky at the top.


If you want 100% compliance, put your rules on the registration page where people can see them.   Not lock threads for not following rules hidden deep in the forum in a stickied post.

It really is as simple as pointing out there are additional rules and including a link to them right on the registration page.   
 
   
« Last Edit: June 23, 2017, 12:54:54 PM by Jack Hoff »
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7562
  • Audio Plumber
Posting Rules
« Reply #1 on: June 23, 2017, 08:38:23 AM »

I recently purchased a JBL Srx800 setup

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
Logged

ProSoundWeb Community

Posting Rules
« Reply #1 on: June 23, 2017, 08:38:23 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.022 seconds with 21 queries.