ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Tools for managing 2.4GHz?  (Read 1191 times)

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 935
Re: Tools for managing 2.4GHz?
« Reply #10 on: May 17, 2017, 11:07:20 pm »

When using wifi analyzer in 5GHz to see what my W-DMX units were doing, I also had no results. I assumed that my gear was using frequencies other than standard ones while within the 5GHz band, and that was why I didn't see anything.

Might that be the case with the HMEs?

The analyzer correctly sees all my 2.4 & 5GHz router/wifi activity at home and on the gig, so I'd love to know if that is the case.

Wifi Analyzer only sees official wifi traffic, which makes sense. It would be great if it could see non-wifi RF in that band, but it just not be possible to get the chipset to do that.  All of this stuff uses Spread Spectrum (aka frequency hopping) so the frequencies are constantly changing.
Logged

Jerome Malsack

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1140
Re: Tools for managing 2.4GHz?
« Reply #11 on: May 19, 2017, 08:00:24 pm »

Found this with google.   good read might help.

http://www.rchelicopterfun.com/RC-Spread-Spectrum.html
Logged

Bob Charest

  • Lab Lounge
  • Hero Member
  • *
  • Offline Offline
  • Posts: 691
  • Westbrook ME, USA
    • Bob Charest Band
Re: Tools for managing 2.4GHz?
« Reply #12 on: May 19, 2017, 10:12:43 pm »

Found this with google.   good read might help.

http://www.rchelicopterfun.com/RC-Spread-Spectrum.html
Thanks, Jerome!


Sent from my iPhone using Tapatalk
Logged
Pages: 1 [2]  All   Go Up
 


Page created in 0.062 seconds with 17 queries.