ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: My first use of Pliant Crewcom  (Read 2724 times)

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1457
    • Best Audio
My first use of Pliant Crewcom
« on: September 27, 2018, 05:22:48 PM »
Here's a page about it.  Ask me for more specifics.

http://www.bestaudio.com/crewcom/
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
[email protected]

brian maddox

  • Hero Member
  • *****
  • Online Online
  • Posts: 3271
  • HeyYahWon! ttsss! ttsss!
Re: My first use of Pliant Crewcom
« Reply #1 on: September 27, 2018, 07:49:42 PM »
Quote from: Pete Erskine on September 27, 2018, 05:22:48 PM
Here's a page about it.  Ask me for more specifics.

http://www.bestaudio.com/crewcom/

What's the frequency Kenneth?  [sorry, old guy joke...]

What Frequency band is this leveraging?  And i'd love to know more about What Yagi antennas were used?  And also how do the antennas get implemented over Fiber?  Is it an IP signal coming from the Transceivers?

Gonna go play around on their site for a while which will probably answer some of my questions, but i thought maybe some of the answer might be useful for others here as well...
Logged
"It feels wrong to be in the audience.  And it's too peopley!" - Steve Smith

brian maddox
[email protected]
Savannah, GA

'...do not trifle with the affairs of dragons...

       ....for you are crunchy, and taste good with ketchup...'

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1457
    • Best Audio
Re: My first use of Pliant Crewcom
« Reply #2 on: September 27, 2018, 08:02:05 PM »
Quote from: brian maddox on September 27, 2018, 07:49:42 PM
What's the frequency Kenneth?  [sorry, old guy joke...]

What Frequency band is this leveraging?  And i'd love to know more about What Yagi antennas were used?  And also how do the antennas get implemented over Fiber?  Is it an IP signal coming from the Transceivers?

Gonna go play around on their site for a while which will probably answer some of my questions, but i thought maybe some of the answer might be useful for others here as well...

our system was 900 meg.  also does 2.4G.  The network is proprietary , not able to share.  each antenna has cat5 and sfp in and cat5 out.  look at the system drawing - purple is fiber.  Yagi antennas were 900 Meg.  Power one antenna at fiber end also powers 3 looped antennas.
« Last Edit: September 27, 2018, 08:15:20 PM by Pete Erskine »
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
[email protected]

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2318
    • Check Check One Two
Re: My first use of Pliant Crewcom
« Reply #3 on: October 04, 2018, 09:34:51 PM »
What's your take on it compared to say, Tempest or RadioActive?
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2318
    • Check Check One Two
Re: My first use of Pliant Crewcom
« Reply #4 on: October 07, 2018, 03:51:41 PM »
Or Freespeak?
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1457
    • Best Audio
Re: My first use of Pliant Crewcom
« Reply #5 on: October 07, 2018, 11:47:03 PM »
Quote from: Andrew Broughton on October 04, 2018, 09:34:51 PM
What's your take on it compared to say, Tempest or RadioActive and Freespeak?

October 19 at 1pm at the Javits Center in NYC I am Charing a forum with 6 manufacturers to compare their systems.  All will be demonstrated and audio quality compared to Telex BTR.

Clear-Com Freespeak
Pliant Crewcom
RAD UV-1G
Riedel Bolero
Telex Romeo
Unity Intercom

Sound Reinforcement: SR07 - Intercom Systems Super Session


After AES I will assemble a spreadsheet of comparison
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
[email protected]

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2318
    • Check Check One Two
Re: My first use of Pliant Crewcom
« Reply #6 on: October 08, 2018, 02:04:22 AM »
Quote from: Pete Erskine on October 07, 2018, 11:47:03 PM
October 19 at 1pm at the Javits Center in NYC I am Charing a forum with 6 manufacturers to compare their systems.  All will be demonstrated and audio quality compared to Telex BTR.

Clear-Com Freespeak
Pliant Crewcom
RAD UV-1G
Riedel Bolero
Telex Romeo
Unity Intercom

Sound Reinforcement: SR07 - Intercom Systems Super Session


After AES I will assemble a spreadsheet of comparison
Excellent. I look forward to seeing the spreadsheet. So glad you are able to do this - side-by-side comparisons are hard to come by.
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

ProSoundWeb Community

Re: My first use of Pliant Crewcom
« Reply #6 on: October 08, 2018, 02:04:22 AM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.038 seconds with 22 queries.