ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Install digital processor/mixer  (Read 1229 times)

Gary Fitzpatrick

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 87
  • Fermanagh, Ireland
Install digital processor/mixer
« on: April 22, 2017, 11:11:54 am »

Hi,

I'm doing an install in a church, and looking ideas for the main system processor/mixer. It's a set-and-forget system really...only 6 mics in total (3 on altar, 1 wireless handheld and 2 in the gallery for the choir) and a single zone output. Looking for something that can give me advanced control using an iPad or laptop or something for setting eq, compression etc on install, but that still has knobs on the front so that the end users have some basic control. I would have used BSS London soundweb devices for this in the past, but looking something a little cheaper if possible. Any recommendations?


Sent from my iPhone using Tapatalk
Logged
Allen Heath GL2000, EV sx300 over Community pro Subs, EV s-200 monitors, Zeck amplification

Art Nadelman

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
Re: Install digital processor/mixer
« Reply #1 on: April 22, 2017, 11:16:28 am »

Allen & Heath QU-16.  Very similar in feel to an analogue board, but with digital capabilities and excellent sound.
Logged

Gary Fitzpatrick

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 87
  • Fermanagh, Ireland
Re: Install digital processor/mixer
« Reply #2 on: April 22, 2017, 02:52:04 pm »

Yea i was actually thinkin of using a QU SB or QU PAC but just wondering if there is anything else out there. This will sit in a rack and only maybe be touched once or twice a year so don't necessarily need full faders...even just knobs for volume would be fine


Sent from my iPhone using Tapatalk
Logged
Allen Heath GL2000, EV sx300 over Community pro Subs, EV s-200 monitors, Zeck amplification

Darrel Harris

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Re: Install digital processor/mixer
« Reply #3 on: April 23, 2017, 11:51:07 am »

Hi,

I'm doing an install in a church, and looking ideas for the main system processor/mixer. It's a set-and-forget system really...only 6 mics in total (3 on altar, 1 wireless handheld and 2 in the gallery for the choir) and a single zone output. Looking for something that can give me advanced control using an iPad or laptop or something for setting eq, compression etc on install, but that still has knobs on the front so that the end users have some basic control. I would have used BSS London soundweb devices for this in the past, but looking something a little cheaper if possible. Any recommendations?

I'd suggest a QU-PAC + an Apple Airport Express
Use QU-PAD for your setup & the QU-Control APP for your clients.



Sent from my iPhone using Tapatalk
Logged

Mark Mattocks

  • Newbie
  • *
  • Offline Offline
  • Posts: 36
Re: Install digital processor/mixer
« Reply #4 on: April 23, 2017, 04:02:17 pm »

I like the Ashly NE24-24, configured as needed, with the FR-8 or 16 fader bank. You can also build a simple or complex control interface on iPad for the Ashly.
Logged

Caleb Dueck

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 542
    • Excel AV Group
Re: Install digital processor/mixer
« Reply #5 on: April 23, 2017, 04:33:00 pm »

This is exactly the situation where QSC QSys or Symetrix Prism or similar shine. 
Logged
Experience is something you get right after you need it.

Excel AV Group

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1155
    • Sturz Audio
Re: Install digital processor/mixer
« Reply #6 on: April 23, 2017, 04:46:45 pm »

This is exactly the situation where QSC QSys or Symetrix Prism or similar shine.
Cheaper then BSS though? Doubtful


Sent from my iPhone using Tapatalk Pro
Logged
CTS-D, CTS-I
AES Full Memeber

David Simpson

  • Full Member
  • ***
  • Offline Offline
  • Posts: 112
Re: Install digital processor/mixer
« Reply #7 on: April 24, 2017, 08:51:40 am »

I put a QU-PAC into 2 different church installs last year. Each had only a handful of wireless and wired inputs and mains / baby room outputs. Both congregations are very happy with the units. Neither has dedicated tech staff or voulenteers and seem to navigate things well as needed.

~Dave
Logged

Erik Jerde

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 356
Re: Install digital processor/mixer
« Reply #8 on: April 24, 2017, 11:02:19 am »

Cheaper then BSS though? Doubtful


Sent from my iPhone using Tapatalk Pro

Hardware, no.  Once you figure in programming time & UI development it may be a wash.  I've found QSYS to be a lot easier/faster to program (and much more powerful) than BSS. 
Logged

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1155
    • Sturz Audio
Install digital processor/mixer
« Reply #9 on: April 24, 2017, 12:43:43 pm »

The devil you know. I can program a UI twice as fast in AA than Qsys. It would be three times as fast if AA had hot keys. I will agree that Qsys is more powerful if you are doing advanced scripting. If you are routing input to output with some bits in the middle... they both get it done.


Sent from my iPhone using Tapatalk Pro
Logged
CTS-D, CTS-I
AES Full Memeber
Pages: [1] 2  All   Go Up
 


Page created in 0.095 seconds with 19 queries.