ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: FS: Complete Tomcat 46 X 43 Roof System  (Read 433 times)

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1146
    • Sturz Audio
FS: Complete Tomcat 46 X 43 Roof System
« on: April 18, 2017, 08:26:04 pm »

Company I work for is selling one of their roofs. PM for more information.

http://www.ebay.com/itm/Tomcat-46-X-43-Roof-System-Complete-Turnkey-/162470087987?&_trksid=p2056016.l4276

Tomcat 46 X 43 Roof System.  Purchased in July of 2011.  This roof is in excellent condition.  Includes the following items:
Tomcat 46 X 43 Roof.  Includes towers upgraded to MK2. Also includes 4 extra corner blocks to connect 24" X 12" Spigoted truss to make a self climbing grid. 

6 CM 1 Ton Model L motors in cases with 80' lift OR 8 Stagemaker SR10 1 Ton motors in cases with 80' lift, your choice.

Motion Labs 12 way motor controller with Soca 7 pin cables.

1998 Utility 53' Van Semi Trailer. 


Technical information

Roof grid will support 16,000 lbs (7,257 kg)
Roof cover provided
Entire system will pack into a 24 ft truck

This roof design has long been one of the most popular ever offered by TOMCAT due to its loading capabilities and its ease of transport . Because of its unique construction, including sleeves for the 12 tower that are built into the perimeter grid , the system boasts a total maximum uniform distributed load of 16,000 pounds (7,258 kg). The name of this roof is derived from the outside dimensions of the grid: 43 ft (13.11m) deep by 46 ft (14.02 m) wide. In addition to the ability to erect the system in just a few hours, the entire system easily fits into a mid-size truck.
« Last Edit: April 18, 2017, 10:28:35 pm by David Sturzenbecher »
Logged
CTS-D, CTS-I
AES Full Memeber
Pages: [1]   Go Up
 


Page created in 0.076 seconds with 17 queries.