ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Behringer 404hd Trouble, help please  (Read 697 times)

Miguel Angel Castro Rios

  • Newbie
  • *
  • Offline Offline
  • Posts: 24
Behringer 404hd Trouble, help please
« on: October 14, 2016, 11:06:23 am »

I just bought a Behringer Audio Interface, it comes with this feature to listen to realtime for recording, but I will use it for measurment.
It tells me that I can use the "mix knob" to bring down the realtime level to the output from the inputs. Still no luck, I set up my measurment mic and it comes right out the output, with the mix knob all the way down. This creates a feedback loop, has anyone had this issue before?


I'm running on windows 8.1 and installed the driver from behringer website.
Logged

Mark Wilkinson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 532
Re: Behringer 404hd Trouble, help please
« Reply #1 on: October 15, 2016, 07:18:00 pm »

Hi Miguel,  what measurement program are you using?

I would think that your output to whatever program you are using  is via USB , not from a physical output. 
Then, the input channel gain is the only output adjustment.  The Mix control has no effect.
Logged
Pages: [1]   Go Up
 


Page created in 0.02 seconds with 17 queries.