ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Here we go, time to put a new system together  (Read 7487 times)

Ray Aberle

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 3455
  • Located in Vancouver, WA (and serves OR-WA-ID-BC)
    • Kelcema Audio
Re: Here we go, time to put a new system together
« Reply #10 on: November 24, 2015, 08:21:39 PM »

I think he means:

"A system that can be utilized for all sizes of events, *below the size of an event that would suggest a small line array*"

-Ray
Logged
Kelcema Audio
Regional - Serving Pacific Northwest (OR, WA, ID, BC)

Mike Sullivan

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 394
Re: Here we go, time to put a new system together
« Reply #11 on: November 24, 2015, 08:51:24 PM »

I think he means:

"A system that can be utilized for all sizes of events, *below the size of an event that would suggest a small line array*"

-Ray

Thank you, people do not learn how to read, apparently.
Logged
When you're reading a topic, and the word "Danley" comes up...RUN!!!

John L Nobile

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2658
Re: Here we go, time to put a new system together
« Reply #12 on: November 24, 2015, 11:08:47 PM »

Thank you, people do not learn how to read, apparently.

Hard to read your posts with the animation distraction underneath.
Logged

Mike Sullivan

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 394
Re: Here we go, time to put a new system together
« Reply #13 on: November 25, 2015, 01:24:46 AM »

Hard to read your posts with the animation distraction underneath.

They still produce Adderall if it's that big of a deal.  ::)
Logged
When you're reading a topic, and the word "Danley" comes up...RUN!!!

John L Nobile

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2658
Re: Here we go, time to put a new system together
« Reply #14 on: November 25, 2015, 08:35:02 AM »

They still produce Adderall if it's that big of a deal.  ::)

Just what we need on this forum. A comedian.
Logged

Cailen Waddell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1428
Re: Here we go, time to put a new system together
« Reply #15 on: November 25, 2015, 08:50:53 AM »


They still produce Adderall if it's that big of a deal.  ::)

Since you're funny...

I was having trouble hearing your post due to the lack of point source phase coherency.  Perhaps try a danley box



Sent from my iPhone using Tapatalk
Logged

Ray Aberle

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 3455
  • Located in Vancouver, WA (and serves OR-WA-ID-BC)
    • Kelcema Audio
Re: Here we go, time to put a new system together
« Reply #16 on: November 25, 2015, 09:45:22 AM »

... a new scaleable system, which I can use my shows, below what is needed to use a small line array system.  Being able to ...

I keep getting confused by the apparent lack of "for" or "at" between "use" and "my." It's FREAKING ME OUT. Heh. In my defense, I try to avoid extrapolating from incomplete data, as that usually leads to confusion or inaccurate results.

I was having trouble hearing your post due to the lack of point source phase coherency.  Perhaps try a danley box

YOU WENT THERE!!

But seriously folks, I like the suggestion made about using the SRX boxes (that you'd be buying) with the RCF rig, so they'd play nicely with the larger system. That flexibility will be helpful, in my opinion.

-Ray
Logged
Kelcema Audio
Regional - Serving Pacific Northwest (OR, WA, ID, BC)

Mike Sullivan

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 394
Re: Here we go, time to put a new system together
« Reply #17 on: November 27, 2015, 03:38:32 AM »

Just what we need on this forum. A comedian.

I'm a smartass, get it right.   :-X

I keep getting confused by the apparent lack of "for" or "at" between "use" and "my." It's FREAKING ME OUT. Heh. In my defense, I try to avoid extrapolating from incomplete data, as that usually leads to confusion or inaccurate results.

YOU WENT THERE!!

But seriously folks, I like the suggestion made about using the SRX boxes (that you'd be buying) with the RCF rig, so they'd play nicely with the larger system. That flexibility will be helpful, in my opinion.

-Ray

I had planned on keeping the RCF together as it's own rig, and if I ended up needing part of the SRX for a show, I could do that as well.  Though the more I think about it, I'm almost tempted to just buy maybe 2 or 4 SRX812's and actually end up getting a good low profile monitor, like the RCF NX12SMA.  Although more expensive, it's a lot closer to the SRX712M's dimensions, which would help especially on small stages.
Logged
When you're reading a topic, and the word "Danley" comes up...RUN!!!

ProSoundWeb Community

Re: Here we go, time to put a new system together
« Reply #17 on: November 27, 2015, 03:38:32 AM »


Pages: 1 [2]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.028 seconds with 26 queries.