ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: RF coordination - IAS and loading freqs to avoid  (Read 3235 times)

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1042
    • Best Audio
RF coordination - IAS and loading freqs to avoid
« on: October 05, 2015, 07:28:51 pm »

Sometimes when coordinating frequencies for a venue, there is already a sho in the adjacent theatre.  The local RF tech sends over a printout of a few hundred freqs to avoid and then it's hell....

Here is a way to do it automatically. 

https://youtu.be/WRO_QBWIj50
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2366
  • Toronto
Re: RF coordination - IAS and loading freqs to avoid
« Reply #1 on: October 06, 2015, 07:34:55 am »

Thanks Pete...good info to know.
On a related note, when is it useful to unselect 5ths and,or, 3rdTX and when should they always be used?
« Last Edit: October 06, 2015, 11:29:56 am by Pete Erskine »
Logged
I don't care enough to be apathetic

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1042
    • Best Audio
Re: RF coordination - IAS and loading freqs to avoid
« Reply #2 on: October 06, 2015, 11:30:07 am »

Thanks Pete...good info to know.
On a related note, when is it useful to unselect 5ths and,or, 3rdTX and when should they always be used?

When calc TX freqs which are in combiners use all.

For mics 3&5 are sufficient.  Not using either will only space freqs with out any intermod calc - this is last resort.

For more freqs lower the distance of 3&5 to 40 MHZ

If you can put everything in same zone.  After calc and you cant find enough RX for BTRs move them to another zone and calc only the ones which couldn't complete.  That way at least some are 3&5 with the TX Zone.
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Diogo Nunes Pereira

  • Full Member
  • ***
  • Offline Offline
  • Posts: 114
  • Barcelona, sometimes...
Re: RF coordination - IAS and loading freqs to avoid
« Reply #3 on: October 07, 2015, 05:15:48 am »

Sometimes when coordinating frequencies for a venue, there is already a sho in the adjacent theatre.  The local RF tech sends over a printout of a few hundred freqs to avoid and then it's hell....

Here is a way to do it automatically. 

https://youtu.be/WRO_QBWIj50

Thank you Pete,

really easy way to add exclusion frequencies. I start to understand the power of IAS...

I wonder if anyone knows of an easy way to do this in WWB. I opened the exclusion files (.cxl, .fxl) in Notepad and Excel and it's kind of hard to make any sense of it, or trying to format it.

D
« Last Edit: October 07, 2015, 07:46:19 am by Diogo Nunes Pereira »
Logged
Diogo Nunes Pereira
elraval@gmail.com
--------------------------
"I envy not those who own charriots, horses or land. I envy only those who drink water from every spring." - Popular Song from Portugal

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1042
    • Best Audio
Re: RF coordination - IAS and loading freqs to avoid
« Reply #4 on: October 07, 2015, 09:50:57 am »

I wonder if anyone knows of an easy way to do this in WWB. I opened the exclusion files (.cxl, .fxl) in Notepad and Excel and it's kind of hard to make any sense of it, or trying to format it.

Currently there is no way to load freqs into WWB according to Shure.
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com
Pages: [1]   Go Up
 


Page created in 0.105 seconds with 19 queries.