Topic: Front Fills from a QU-16 (Read 2253 times)

Robert Lunceford · « **on:** January 27, 2015, 10:00:30 PM »

Anybody know how to setup one of the outputs to feed front fills and have the level follow the master fader?

Tim McCulloch · « **Reply #1 on:** January 27, 2015, 10:01:14 PM »

Anybody know how to setup one of the outputs to feed front fills and have the level follow the master fader?

Does the Qu16 have matrices?

Robert Lunceford · « **Reply #2 on:** January 27, 2015, 10:08:26 PM »

Does the Qu16 have matrices?

QU24 & 32 have matrices, the QU16 does not.

Sean McDaniel · « **Reply #3 on:** January 27, 2015, 10:16:45 PM »

QU24 & 32 have matrices, the QU16 does not.

If you can "copy" the main mix and paste it to an aux mix post fader maybe?

Earl F Young · « **Reply #4 on:** January 27, 2015, 11:23:00 PM »

Use "Alt" or 2nd main out/s

If you can "copy" the main mix and paste it to an aux mix post fader maybe?

Darrel Harris · « **Reply #5 on:** January 27, 2015, 11:53:14 PM »

Post fade Aux

g'bye, Dick Rees · « **Reply #6 on:** January 28, 2015, 08:21:23 AM »

Anybody know how to setup one of the outputs to feed front fills and have the level follow the master fader?

Only if the mix sent to the fills is the same as the mains. There's no way to have a separate specific mix follow the master faders.

Sean Miller · « **Reply #7 on:** January 30, 2015, 03:54:44 PM »

If the mains are powered speakers you can daisy chain off of them

ProSoundWeb Community · « **Reply #7 on:** January 30, 2015, 03:54:44 PM »

ProSoundWeb Community