Another major problem with the unit is that the dynamics processing occurs immediately following the input, and is therefore always audible in the aux outputs. I mentioned this to a QSC rep who seemed incredulous at first, but then confirmed that this was indeed the case. I heard through the grapevine that this also might be something addressed in a new firmware revision. I hope it is, because compression in the monitors drives most singers nuts.
I have not noticed this on my TM16. However, Chris Brouelette posted this on QSC's forum: Firmware V2.0 will be released Jan 22, 2015.I like my TM16, it works great for Ceremonies & Cocktail bands. I haven't worked with a Bar Band on it, but at first... it maybe a little slow like any other digital console setting up for the first time.My only issue with the supplied console is the USB Network thingy, it has a very limited range. However, that can be easily fixed with a WiFi Network box.
It looks like the new firmware is out and has addressed some of the issues:"New features include:Support for password protected, multi-level security accessExpanded Wi-Fi options (including wired connection to an infrastructure router)Programability of User ButtonsMore options for auxiliary mix pick-off pointsExpanded channel presetsUpdated iOS appPersonal monitor mix application for both iPhone and iPod TouchOperator may limit or allow access on a per-device basisiPhone control of the record/playback transport controls and programmable user buttonsAndroid support (coming soon)TouchMix v2.0 software standard on new TouchMix-16 and TouchMix-8 models and available as a free download at QSC.com for existing TouchMix owners."I plan on talking to the folks at the QSC booth at NAMM before I pull the trigger.
Don,Did you clarify the "more options for aux pick off points"? Does that include "pre everything"?John
I regularly use the TM16 via the WiFi dongle at 40' with no interruption, despite bring directly beneath a 600mw WiFi access point (12' ceiling mounted). I was not expecting that performance.The new menu does have "Pre All", "Pre-Dyn", "Pre-Fader", and "Post Fader" options.frank
Frank, that's great news. After seeing this thread I went to the QSC forum for the Touchmix. There are more than a few posts about lockups and other weirdness that gave me chills. (I just had a lockup with my SL1642 that forced me to send it in for service) What's your experience?
BTW,Someone in the Lounge commented on how it looked like the weight of the snake would pull it off of the surface it sat on. I currently have a copper snake and if I go this route the iPAD would be forthcoming. Will the TM16 handle the weight of the cable?John
Page created in 0.108 seconds with 16 queries.