ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: A Bit about DB Measurements and some Math  (Read 1070 times)

Canute J. Chiverton

  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
A Bit about DB Measurements and some Math
« on: September 21, 2014, 02:34:51 pm »

I hope this is the correct Forum, if not feel free to move. I wanted to share this article.

http://education.lenardaudio.com/en/03_db.html
Canute J. Chiverton
Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8665
  • Atlanta GA
Re: A Bit about DB Measurements and some Math
« Reply #1 on: September 21, 2014, 08:01:27 pm »

I hope this is the correct Forum, if not feel free to move. I wanted to share this article.

http://education.lenardaudio.com/en/03_db.html
Canute J. Chiverton
There are a number of things wrong with this-starting with the name at the top Db is not the way to write it.

What does time have to do with resistance?

The ohm is not resistance divided by freq.

The voltage of AC power has nothing to do with freq.

And so forth.

There is some good information-but also a bit misinformation here.

Just beware!!!!!!!!!!!
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!
Pages: [1]   Go Up
 


Page created in 0.069 seconds with 23 queries.