ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: I need repair for three EAW KF650z 10" cones  (Read 2429 times)

Randall Cook

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 97
    • CRYSTAL HEAR
I need repair for three EAW KF650z 10" cones
« on: September 20, 2014, 11:53:29 PM »

I have three 10" OEM cones from KF650z that need repaired/reconed.  I want OEM equipment and quality repairs. 

Does anyone know where I can take these in the Cincinnati, Ohio area?  If not near me, what is my best option?
Logged

John Halliburton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 866
  • Still has hair and white pointy beard...
Re: I need repair for three EAW KF650z 10" cones
« Reply #1 on: September 21, 2014, 10:44:33 AM »

I have three 10" OEM cones from KF650z that need repaired/reconed.  I want OEM equipment and quality repairs. 

Does anyone know where I can take these in the Cincinnati, Ohio area?  If not near me, what is my best option?

Try Parts Express?  They advertise their reconing operation on their site.

Best regards,

John
Logged

Hayden J. Nebus

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 637
  • Richmond, VA
Re: I need repair for three EAW KF650z 10" cones
« Reply #2 on: September 21, 2014, 09:22:06 PM »

I'd reccomend Performance Audio of New England in Whittinsville MA, or Mueller Speaker in Richland, PA  .

Logged

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1467
Re: I need repair for three EAW KF650z 10" cones
« Reply #3 on: September 22, 2014, 01:29:27 AM »

I have three 10" OEM cones from KF650z that need repaired/reconed.  I want OEM equipment and quality repairs. 

Does anyone know where I can take these in the Cincinnati, Ohio area?  If not near me, what is my best option?

They were made by B&C, however you may have to use EAW parts for these.  The cone profile,  and in particular the dust cap (which was unusual) must match the original to maintain the correct clearance between it and the phase plug for it to work as intended.

Logged

eric lenasbunt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 861
    • Bunt Backline Event Services, LLC
Re: I need repair for three EAW KF650z 10" cones
« Reply #4 on: September 22, 2014, 09:53:52 PM »

New drivers for these are only about $200/ea, may be about the same as an OEM recone
Logged

ProSoundWeb Community

Re: I need repair for three EAW KF650z 10" cones
« Reply #4 on: September 22, 2014, 09:53:52 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 3.249 seconds with 25 queries.