ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: EAW KF750 Processor settings for Lake Contour  (Read 3890 times)

Craig Clifton

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
EAW KF750 Processor settings for Lake Contour
« on: June 19, 2014, 03:24:24 AM »

Hi all
         Does anyone know where I can find processor settings for Lake Contour with EAW 750 series? Do the generic EAW settings work or are they not suitable for the Lake?
I know the UX8800 would be ideal but it's not an option for where I work.
Does anyone here have custom settings for Lake and EAW750 that they would like to share?
Many thanks in advance
Logged

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1467
Re: EAW KF750 Processor settings for Lake Contour
« Reply #1 on: June 19, 2014, 10:12:05 AM »

Hi all
         Does anyone know where I can find processor settings for Lake Contour with EAW 750 series? Do the generic EAW settings work or are they not suitable for the Lake?
I know the UX8800 would be ideal but it's not an option for where I work.
Does anyone here have custom settings for Lake and EAW750 that they would like to share?
Many thanks in advance

Lab Gruppen / Lake has them as a down load along with most manufactures ...
Logged

Craig Clifton

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Re: EAW KF750 Processor settings for Lake Contour
« Reply #2 on: June 20, 2014, 03:43:48 AM »

Lab Gruppen / Lake has them as a down load along with most manufactures ...
Hi Peter
            Thanks for the time doing that.
I have been there and loaded those modules for EAW into the Lake, however they have password locked most of the parameters (X-over, channel delay, PEQ etc.)
I can't even view the x-over in designer mode, which I find a little scary. It is probably fine, but it would be reassuring to see visually what is happening.
Any thoughts?
Logged

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1467
Re: EAW KF750 Processor settings for Lake Contour
« Reply #3 on: June 20, 2014, 11:37:19 AM »

Hi Peter
            Thanks for the time doing that.
I have been there and loaded those modules for EAW into the Lake, however they have password locked most of the parameters (X-over, channel delay, PEQ etc.)
I can't even view the x-over in designer mode, which I find a little scary. It is probably fine, but it would be reassuring to see visually what is happening.
Any thoughts?

Basically they are just these settings –
http://eaw.com/docs/2_Legacy_Products/Processor%20Settings/KF750/KF750_PROCS_rev1.pdf

I don’t know if they had to adjust the filters Q’s etc. for the Lake.

For what it’s worth, there is a big difference using the Gunness Focus settings.
There was also an error in the early GF settings that produced a 14 dB peak in the HF for the small box array settings.  After that was fixed they sounded great, much much better than with a normal processor.
Logged

ProSoundWeb Community

Re: EAW KF750 Processor settings for Lake Contour
« Reply #3 on: June 20, 2014, 11:37:19 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 25 queries.