ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Single channel AES50 breakout box  (Read 6009 times)

Brian Jojade

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3391
    • HappyMac Digital Electronics
Single channel AES50 breakout box
« on: June 10, 2014, 03:18:41 PM »

Does such a thing exist?

The concept I was thinking would be a box that you can attach to an AES50 signal and then select which output channel it listens to.  The boxes could then cascade so you can attach multiples along the chain, each picking which to output. This could be handy for things like stage monitors, where you simply lay a single line, then select which channel the speaker is going to be.

Logged
Brian Jojade

Dan Mortensen

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1071
Re: Single channel AES50 breakout box
« Reply #1 on: June 10, 2014, 04:08:37 PM »

Does such a thing exist?

The concept I was thinking would be a box that you can attach to an AES50 signal and then select which output channel it listens to.  The boxes could then cascade so you can attach multiples along the chain, each picking which to output. This could be handy for things like stage monitors, where you simply lay a single line, then select which channel the speaker is going to be.

If it does exist, it will be a Midas or K-T product, since they own AES50.

Good luck!
Logged

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1966
  • So. Dak.
    • Sturz Audio
Re: Single channel AES50 breakout box
« Reply #2 on: June 10, 2014, 04:17:29 PM »

Isn't there a company that starts with a B that it could be too?


Sent from my iPhone using Tapatalk
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Dan Mortensen

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1071
Re: Single channel AES50 breakout box
« Reply #3 on: June 10, 2014, 04:25:21 PM »

Isn't there a company that starts with a B that it could be too?


Sent from my iPhone using Tapatalk

There is a company starting with B that uses AES50, but I definitively know they don't have anything like what Brian is asking for.
Logged

Josh Hana

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 254
Re: Single channel AES50 breakout box
« Reply #4 on: June 11, 2014, 09:18:28 AM »

You might be better off looking at one of the DL100 series stageracks from Midas. (possibly the M16 or whatever the smaller one for the M32 is if it's available). The other option could be the KT network bridge but I don't think there are any analog output card options, but I could be wrong
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7551
  • Audio Plumber
Re: Single channel AES50 breakout box
« Reply #5 on: June 11, 2014, 10:08:31 AM »

Does such a thing exist?

The concept I was thinking would be a box that you can attach to an AES50 signal and then select which output channel it listens to.  The boxes could then cascade so you can attach multiples along the chain, each picking which to output. This could be handy for things like stage monitors, where you simply lay a single line, then select which channel the speaker is going to be.

Too bad it's not MADI, or there would be THIS BOX.

I would love to see a Dante version as well.

Mac
Logged

Steve M Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3381
  • Isle of Wight - England
Re: Single channel AES50 breakout box
« Reply #6 on: June 11, 2014, 10:11:35 AM »

This could be handy for things like stage monitors, where you simply lay a single line, then select which channel the speaker is going to be.

I wouldn't be surprised to see something like this built into active speakers/monitors in the not too distant future.


Steve.
Logged

TonyWilliams

  • Full Member
  • ***
  • Offline Offline
  • Posts: 141
  • Nashville, TN
    • Blog
Re: Single channel AES50 breakout box
« Reply #7 on: June 11, 2014, 12:37:40 PM »

I would really like a Qbox type unit with Dante, Madi, etc. Being able to check lines and offer a quick fix would be great. I'm sure it would be pricey.


- Tony Williams
Logged
____________
Tony Williams
June Audio Video
Blog

Martin Morris

  • Full Member
  • ***
  • Offline Offline
  • Posts: 157
Re: Single channel AES50 breakout box
« Reply #8 on: June 11, 2014, 10:50:40 PM »

http://www.four-audio.com/en/products/dbs1.html

Not quite the monitor panel - via a PC it could be

Too bad it's not MADI, or there would be THIS BOX.

I would love to see a Dante version as well.

Mac

« Last Edit: June 11, 2014, 10:58:00 PM by Martin Morris »
Logged
Dude told me to "go back to where I came from", so I set my tent up on his front lawn ... (unnamed Indian)

Chris Johnson [UK]

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 446
Re: Single channel AES50 breakout box
« Reply #9 on: June 12, 2014, 12:07:08 PM »

I would love to see a Dante version as well.

Out of interest, how much would you pay for such a device? And what form factor would you like?

Bear in mind, that because of the way Dante works, you would still have to patch a number of channels to the device, but then you could use a front panel interface to select individual channels for monitoring
Logged
Riedel Communications

ProSoundWeb Community

Re: Single channel AES50 breakout box
« Reply #9 on: June 12, 2014, 12:07:08 PM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.056 seconds with 24 queries.