ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Need help looking for aluminum ramps  (Read 1070 times)

John Chevalier

  • Marketplace
  • Newbie
  • *
  • Offline Offline
  • Posts: 10
  • Just do it
    • Chevalier Productions
Need help looking for aluminum ramps
« on: May 21, 2014, 08:04:04 pm »

I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.

John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207

256-835-0360 office
256-835-0923 fax
256-239-1504 cell

www.chevalierproductions.net
Logged
John Chevalier
Chevalier Productions
256-835-0360

John Penkala

  • Full Member
  • ***
  • Offline Offline
  • Posts: 245
Re: Need help looking for aluminum ramps
« Reply #1 on: May 21, 2014, 08:11:54 pm »

I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.

John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207

256-835-0360 office
256-835-0923 fax
256-239-1504 cell

www.chevalierproductions.net

Trywww.grainger.com
Logged

John Chevalier

  • Marketplace
  • Newbie
  • *
  • Offline Offline
  • Posts: 10
  • Just do it
    • Chevalier Productions
Re: Need help looking for aluminum ramps
« Reply #2 on: May 21, 2014, 08:55:20 pm »

Logged
John Chevalier
Chevalier Productions
256-835-0360

Steve Alves

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 297
  • South Florida
    • South Florida Sound
Re: Need help looking for aluminum ramps
« Reply #3 on: May 21, 2014, 09:26:58 pm »

Try http://www.bpmfg.com/products

They have several dealers (Grainger is one) but I special ordered mine.
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 13063
  • Wichita, Kansas USA
Re: Need help looking for aluminum ramps
« Reply #4 on: May 21, 2014, 10:01:04 pm »

I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.

John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207

256-835-0360 office
256-835-0923 fax
256-239-1504 cell

www.chevalierproductions.net

New Haven Moving Equipment, Copperloy, probably a few others.
Logged
Chewing through your wimpy dreams
They eat without a sound,
Digesting England by the pound.

Kirby Yarbrough

  • SR Forums
  • Sr. Member
  • *
  • Offline Offline
  • Posts: 301
  • Reston, Virginia
Re: Need help looking for aluminum ramps
« Reply #5 on: May 22, 2014, 10:13:06 am »

we need a real ramps. Any help is appreciated.

http://www.harmar.com/groups/5.  I've had one of theirs for ten years.  They might have what you need.
Logged

Thomas Lamb

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 410
Re: Need help looking for aluminum ramps
« Reply #6 on: May 22, 2014, 11:19:01 am »

I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.

John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207

256-835-0360 office
256-835-0923 fax
256-239-1504 cell

www.chevalierproductions.net

discountramps.com is where i got my last one they made me a 32" wide 16' long. Not cheap but it was the best I could find at the time.


Item
Qty
Description
Options
Rate
Amount
AVRP-3516   1   Ramp, Aluminum Walk,16'Length, 32"Width,1500 lb Capacity, Perforations are in center 12 " of ramp,4 1/2:" side rails with 2 1/8" high curbs,standard with a 6" lip and 40" long safety chains       $1,246.00   $1,246.00
Total   $1,246.00
Logged
bigTlamb

"If you suck on a functional analog desk, you'll really suck on a complex digital desk...." Dick Rees

John Moore

  • Full Member
  • ***
  • Offline Offline
  • Posts: 196
  • "learning the hard way sucks donkey kong"
    • Trinity Productions
Logged
http://www.trinityprosound.com 209-832-8023
DEALER:Dealer for Yorkville, EV, QSC, RCF, Danley Sound Labs, VTC, Allen & Heath, Ashly, Denon,  Audix, One Systems, Beyerdynamic, Presonus, K&M, Ultimate,  Trusst, Road Ready, Gator, Radial Engineering, Turbosound, dB Technologies, RCF, American Audio,  Rapco, CBI Cables, ADJ, Chauvet, Blizzard, Furman, Shure, Tascam, Elite Screens,  BenQ, Midas, Digico,  and many many more...

Mark Cadwallader

  • Full Member
  • ***
  • Offline Offline
  • Posts: 158
  • Helena, Montana USA
Re: Need help looking for aluminum ramps
« Reply #8 on: May 23, 2014, 01:34:43 am »

http://www.uline.com/BL_3883/Aluminum-Walk-Ramps

Take a look at MSC Industrial Supply (mscdirect is the website). They have walk ramps, forklift ramps, and dockplates (dance floors). MSC is a tool geek's wet dream - 150 pages of just drill bits (in a 4,000 page catalog). Better prices than uline, IIRC. Mark C.
Logged

Jason Glass

  • Full Member
  • ***
  • Offline Offline
  • Posts: 176
    • CleanWirelessAudio.com
Re: Need help looking for aluminum ramps
« Reply #9 on: May 23, 2014, 09:54:11 am »

I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.

John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207

256-835-0360 office
256-835-0923 fax
256-239-1504 cell

www.chevalierproductions.net

http://www.mcmaster.com/#walk-ramps/=s39f12
Pages: [1] 2  All   Go Up
 


Page created in 0.156 seconds with 23 queries.