Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Glenn Goff]

I updated my si expression and visi remote but I cant get the meters to workon the visi remote. What am I not doing right.

[Ian Routley]

Apparently UDP traffic needs to be enabled on the router.  This seems to have caused metering not to work for some users.


Sent from my iPhone using Tapatalk

[Jonah Powell]

Ian is correct, however I found that if I switched on my console too soon after the router was switched on, the metering would not work.  If I give it a minute, the I get meters.

[Bob Leonard]

Try this link. Also be aware that there is a minor issue with Cisco advanced security features that Soundcraft is working on. All here at the link below;

https://www.facebook.com/SiExpression/posts/306146566219128

[ProSoundWeb Community]